I'm assuming this only works for SYNC 4 equipped Broncos? And does it need to be updated to any specific version, or is it available for older versions too?
Sponsored
Last edited:
How I do this PCM relearn? Cannot find any instruction how to do?Did you do a PCM relearn?
https://www.bronco6g.com/forum/thre...th-forscan-for-2021-bronco.23064/#post-817418How I do this PCM relearn? Cannot find any instruction how to do?
Did you do the PCM relearn explained a few posts above yours?Can anyone help me get mine working? I've done exactly this as well as a relearn and still can't get it to turn on. I have the option on the dash. I've turned it on and back off in the apim and the IPC multiple times with no change. I have a 23 big bend only option is a auto trans
- APIM easymode: Auto-hold [Enabled]
- IPC easymode: Auto-hold [Enabled]
- Menu option appears under Driver Assist, your door must be shut and seatbelt buckled to enable.
Yes I haveDid you do the PCM relearn explained a few posts above yours?
Got it. If you are using the latest version of Forscan, then I got nothing. Sorry.Yes I have