Sponsored

Budget replacement speakers

2022 base

Base
Well-Known Member
First Name
john
Joined
Nov 17, 2021
Threads
21
Messages
432
Reaction score
367
Location
AZ 85143
Vehicle(s)
1991 Chevy, 2004 Cooper S
Your Bronco Model
Base
MB Quart

For anyone on a budget that is looking for speakers only on the base system, this is a great deal!

Ford Bronco Budget replacement speakers d965c00cb842&w=110&h=110&c=7&rs=2&qlt=80&o=6&dpr=1

MB Quart Formula 4 inch 2-way coaxial car speakers with aluminum dome tweeters and Butyl rubber surrounds
RMS Power Handling: 40 Watts
Peak Power Handling: 80 Watts
Speaker Impedance: 4 Ohms
Frequency Response: 55Hz - 19kHz
Sensitivity: 88dB
Crossover Point: 6kHz
Crossover Slope: 12dB
Mounting Diameter / Cut Out: 3.69
Outside Diameter: 5.39
Mounting Depth / Chassis Depth: 3

https://www.walmart.com/ip/MB-Quart...dSellerId=389&adid=22222222222000000000&wmlsp
Sponsored

 

Doum

Member
First Name
Doum
Joined
Aug 18, 2021
Threads
0
Messages
11
Reaction score
18
Location
Montréal
Vehicle(s)
Mustang+MDX
Your Bronco Model
Undecided
Did you use crossover in the front speakers?
 
OP
OP
2022 base

2022 base

Base
Well-Known Member
First Name
john
Joined
Nov 17, 2021
Threads
21
Messages
432
Reaction score
367
Location
AZ 85143
Vehicle(s)
1991 Chevy, 2004 Cooper S
Your Bronco Model
Base
Did you use crossover in the front speakers?
I do not have a bronco to install my speakers but if you plan to use them in the front use a crossover yes. The 6.5 in the kick will make up the difference.
 

Scsoren

Big Bend
Well-Known Member
First Name
Steve
Joined
Dec 28, 2020
Threads
0
Messages
54
Reaction score
23
Location
Arkansas
Vehicle(s)
VW Jetta
Your Bronco Model
Big Bend
Clubs
 
I do not have a bronco to install my speakers but if you plan to use them in the front use a crossover yes. The 6.5 in the kick will make up the difference.
Could you let me know what you mean by “crossover”?
 

John Whammer

Outer Banks
Well-Known Member
First Name
John
Joined
Nov 30, 2020
Threads
16
Messages
166
Reaction score
278
Location
PA
Vehicle(s)
N/A
Your Bronco Model
Outer Banks
From wiki
Audio crossovers are a type of electronic filter circuitry that splits an audio signal into two or more frequency ranges, so that the signals can be sent to loudspeaker drivers that are designed to operate within different frequency ranges. The crossover filters can be either active or passive.

But this seems better:https://blog.teufelaudio.com/what-is-a-speaker-crossover/
 

Sponsored
OP
OP
2022 base

2022 base

Base
Well-Known Member
First Name
john
Joined
Nov 17, 2021
Threads
21
Messages
432
Reaction score
367
Location
AZ 85143
Vehicle(s)
1991 Chevy, 2004 Cooper S
Your Bronco Model
Base

@BadBlueBronco

Badlands
Well-Known Member
First Name
Kc
Joined
Mar 6, 2020
Threads
29
Messages
1,431
Reaction score
2,552
Location
Los angeles
Vehicle(s)
2021 Bronco Badlands
Your Bronco Model
Badlands
Clubs
 
When you look online everyone is saying bass blockers for 4" speakers should be 1200hz but on this forum people are recommending 300hz. Is that because of the lack of center speakers?
Sponsored

 
 





Top