Looks great. Most others setups i came across here had the warning light because they removed the tensioner washer on the belt latch part. Glad there is room to tuck it as i don't like messing with safety stuff. This is exactly how i wanna do mine, clean and not overdone.
Very nice. Do you have any details/specs on this? I'm wanting to do the same. Is it bolted down to the floor, or just resting on top?Finished up my rear seat delete today. It came out better than I expected.
This is fantastic. I'll likely be trying to make something similar. Hope it comes out anywhere close to looking this nice.Finished up my rear seat delete today. It came out better than I expected.
I used an 8x4 3/4 inch plywood sheet to start off. I used cardboard to get the curve of the back that is directly behind the front seats. I'm not great measuring so that was my cheat and it worked pretty good. Length from the center console was 51 inches to the back. Width across is 48 inches behind the seats and it tapers down to 42.5 near the tailgate. I traced my cardboard cutout to the plywood and cut it with a jigsaw.
Thank you. I posted some details on it up above.
Nice! Finally saw a green one in person, really nice looking. It's even nicer the 2DR! lolTop off for first time! Never had a convertible. Also put on some shiny beauty rings. I like ‘em!
Gotta lower the rim or two the entire basket over before the storm. I worry about this even though we have a 75 gal base.Basketball hoop fell over on my baby during a thunderstorm. Hopefully paint-less dent repair can work some magic and then I will get it repainted. If not might have one of those scooped hoods in my future.
Better yet. Got rid of it.
I have a wonderful PDR guy who works magic. Hopefully you can find one out there in PHX.Basketball hoop fell over on my baby during a thunderstorm. Hopefully paint-less dent repair can work some magic and then I will get it repainted. If not might have one of those scooped hoods in my future.
I like it. I went a different way with the cargo shelf to slide in. We filed the patent application for several versions. See pics above. I’ll post more in a week or two.Finished up my rear seat delete today. It came out better than I expected.
Updating . . . Flew into Boise and took delivery Saturday morning at Corwin Ford, Nampa. Road tripping it back to Texas now. Overnighted in Grand Junction, CO. Headed to Boulder then Pikes Peak today. Some pictures from Saturday.Ordered this 2DR Base Mansquatch in October '21 and wasn't expecting it until 2023.
Well here it is at my ordering dealer, marked SOLD with doors locked. I bought my Wildtrak in February '22 so this one is going to my son (who's selling his '20 Tacoma). Flying up later this month to take delivery and roadtrip it back to Texas.
Why did you order in Boise?
Alex - at the time I ordered there was a lot of confusion and uncertainty over Ford‘s new allocation formula and which dealer(s) could get you an ordered Bronco the fastest. I remember posters here saying it was a safe bet that large dealers who sell a lot of cars, not necessarily just Broncos, would be at the front of the line. Someone else posted there were large dealers in Idaho that were getting Broncos. I asked around and Corwin Ford in Nampa, a suburb of Boise, fit the bill. They took my order for MSRP pricing and required only a $200 deposit.Why did you order in Boise?
I moved from Houston to Utah last year. Cancelled my reservation and submitted a new order in Utah. Regret it now... foolishly thought things would turn around by now
