Badlands at golden hour

[EddieA]

Try this stuff. It is crazy how well it works.
It's not like some eternally-lasting magic, but it will absolutely turn black trim black again.
I use an old microfiber and put it on the top of the bottle, turn upside down to get a dab of it on the rag, and rub in the product. Like 3 dabs do a whole flare.
I bought it in 2021 and still have some left.

Even if you just use it to get them black again and use a protectant to maintain, this stuff is crazy-good.

Use a pair of Nitrile gloves. It will stain your finger.

Amazon.com: Solution Finish - Black Plastic & Vinyl Trim Restorer - Use for Car and Truck Detailing, No Wet Look, Instantly Revives Color to Trim, Bumpers, Mud Flaps, Etc., Black (1 oz) : Automotive

Yes, I've heard of this product. Thank you.

Sponsored

 

[lucunup]

Try this stuff. It is crazy how well it works.
It's not like some eternally-lasting magic, but it will absolutely turn black trim black again.
I use an old microfiber and put it on the top of the bottle, turn upside down to get a dab of it on the rag, and rub in the product. Like 3 dabs do a whole flare.
I bought it in 2021 and still have some left.

Even if you just use it to get them black again and use a protectant to maintain, this stuff is crazy-good.

Use a pair of Nitrile gloves. It will stain your finger.

Amazon.com: Solution Finish - Black Plastic & Vinyl Trim Restorer - Use for Car and Truck Detailing, No Wet Look, Instantly Revives Color to Trim, Bumpers, Mud Flaps, Etc., Black (1 oz) : Automotive

How does it hold up over time? The "back to black" type products I've used don't stick around through washing or rain and leave streaks on the paint.

 

[broadicustomworks]

How does it hold up over time? The "back to black" type products I've used don't stick around through washing or rain and leave streaks on the paint.

It is considerably better than the Mothers stuff.
Nothing I have found lasts super long, but this lasts longer than the back to black from Mothers.
I have not tried any of the newer fancy graphene or ceramic stuff out there on trim yet, but will soon.
The stuff I linked is outstanding at getting faded/stained plastics back to a rich black color.
It will wear off but it takes a long time to actually wear back down to a faded grey on old plastics.

I recommend it to get plastics back to that rich color, and would use a higher end protectant to keep it that way.

Edit:
I used it the first time on my 94 Cobra to get the cowl plastic nice again. It was completely faded to a dull light grey. One application of this brought it back to life. It may have been up to 6 months if I remember right before I had to re-dress it with this again to get it back to that factory-new black look again.

 

[MadMan4BamaNATL]

It is considerably better than the Mothers stuff.
Nothing I have found lasts super long, but this lasts longer than the back to black from Mothers.
I have not tried any of the newer fancy graphene or ceramic stuff out there on trim yet, but will soon.
The stuff I linked is outstanding at getting faded/stained plastics back to a rich black color.
It will wear off but it takes a long time to actually wear back down to a faded grey on old plastics.

I recommend it to get plastics back to that rich color, and would use a higher end protectant to keep it that way.

Edit:
I used it the first time on my 94 Cobra to get the cowl plastic nice again. It was completely faded to a dull light grey. One application of this brought it back to life. It may have been up to 6 months if I remember right before I had to re-dress it with this again to get it back to that factory-new black look again.

Hadn’t seen that stuff before. I picked up this Cerekote (spelling) stuff a few months back, but hasn’t had a chance to use it since it’s Summer and I just can’t stop wheeling long enough to care or wash my car.

I’m good with all these Atlanta Poseurs seeing what a Bronco should really look like.

took her in for first oil change last week muddy, they washed it, sort of. Detail guy at dealership comes out to tell me he tried, but it would take too long to bring it back. We had a laugh and I said he didn’t have to even do that much, but it’s cool.

It’s dirty again already.

 

[broadicustomworks]

Hadn’t seen that stuff before. I picked up this Cerekote (spelling) stuff a few months back, but hasn’t had a chance to use it since it’s Summer and I just can’t stop wheeling long enough to care or wash my car.

I’m good with all these Atlanta Poseurs seeing what a Bronco should really look like.

took her in for first oil change last week muddy, they washed it, sort of. Detail guy at dealership comes out to tell me he tried, but it would take too long to bring it back. We had a laugh and I said he didn’t have to even do that much, but it’s cool.

It’s dirty again already.

I like to do this thing called futile effort with a dash of wasted sweat equity.
Before taking it on trails I usually clean it up if it's been longer than a week since the last trail ride.
Then bring it home after trails and wash it again if it is terribly covered. Usually because the inside is covered in about a 1/4" of dust, as I take the doors off and leave them off for the summer.

I also have this habit of driving through the local Ford dealer's lot on the way home to see the gawking at all the dirt and evidence of fun. TBH it's probably helped them sell a few Broncos. Because they look good dirty.

 

[BeachTiger]

I wouldn't recommend using Cerakote wipes unless you want it to be shinier than new, which is the likely end result. I also wouldn't recommend using Solution Finish; it streaks somewhat and is overkill (also messy to use). I have used both of these products (recently in the case of Cerakote), and I think they are both best for trim that is already faded and in need of restoration. For a newer vehicle, I'd stick with 303, Stoner's Trim Shine, VRP, etc., which are more geared towards "maintenance" than restoration. If you happen to have on hand already a spray S102 sealant like Griot's 3-in-1, that also works pretty well and doesn't change the color at all.

 

[EddieA]

I wouldn't recommend using Cerakote wipes unless you want it to be shinier than new, which is the likely end result. I also wouldn't recommend using Solution Finish; it streaks somewhat and is overkill (also messy to use). I have used both of these products (recently in the case of Cerakote), and I think they are both best for trim that is already faded and in need of restoration. For a newer vehicle, I'd stick with 303, Stoner's Trim Shine, VRP, etc., which are more geared towards "maintenance" than restoration. If you happen to have on hand already a spray S102 sealant like Griot's 3-in-1, that also works pretty well and doesn't change the color at all.

Perfect! Yeah, I am afraid of using a "restorer" on the new black trim. I think I'm going to look up your recommendations. I've never heard of Stoner's Trim. sounds funny lol.

 

[EddieA]

I wouldn't recommend using Cerakote wipes unless you want it to be shinier than new, which is the likely end result. I also wouldn't recommend using Solution Finish; it streaks somewhat and is overkill (also messy to use). I have used both of these products (recently in the case of Cerakote), and I think they are both best for trim that is already faded and in need of restoration. For a newer vehicle, I'd stick with 303, Stoner's Trim Shine, VRP, etc., which are more geared towards "maintenance" than restoration. If you happen to have on hand already a spray S102 sealant like Griot's 3-in-1, that also works pretty well and doesn't change the color at all.

What do you think of Technicians Choice? I have the already handy. https://www.amazon.com/Technicians-...ords=technicians+choice&qid=1691094470&sr=8-4

 

[BeachTiger]

What do you think of Technicians Choice? I have the already handy. https://www.amazon.com/Technicians-...ords=technicians+choice&qid=1691094470&sr=8-4

If you mean 582 I'd think that would work well.

 

[STX Bronco]

I have been using this and it’s been great for cleaning up the fenders.

Limited-time deal: Maxima 78920-2PK SC1 High Gloss Coating 34.4 FL. OZ. 1016 mL - NET WT. 24 OZ. (680g), 2-Pack https://a.co/d/iIuHM5n

 

[Area51BS]

Hi, I took this photo the other night. that is all. Just wanted to share it. While I am here, does anyone recommend a black plastic trim cleaner/protector?

Absolutely. Griots 3 in 1 ceramic spray. Use it on the paint, glass, soft top windows, interior hard plastics and the exterior plastics including headlamps. Been using it for 2 years on our cars. Everything looks new. Zero sign of black turning white and no greasy residue.

 

[EddieA]

If you mean 582 I'd think that would work well.

Yes, 582. Thanks for the advice.

 

[Sparkherd]

Hi, I took this photo the other night. that is all. Just wanted to share it. While I am here, does anyone recommend a black plastic trim cleaner/protector?

Aerospace 303

Sponsored