Anyone level a Sasquatch Bronco?

[71to21-2DR]

Zone Offroad 1" Level

I like the 1” vs. 1.5
Just Me!

Sponsored

 

[71to21-2DR]

I really don’t think 1 inch is gonna hurt anything.
Unless you’re a rock crawling nut!
But then you might as well just put a solid axle.

 

[Perfect-Beast-2]

What kit did you use? I’ve been looking for a badlands non sas lift kit.only found zone 1” front leveling kit.

Very good question. I’ll have to dig for it. It was recommended by Mitch @ Town & Country on YouTube. When he proved that the BD could take 35’s.

 

[Perfect-Beast-2]

What kit did you use? I’ve been looking for a badlands non sas lift kit.only found zone 1” front leveling kit.

Hank, this is the one I used (2" front, 1" back) https://www.tccustoms.com/collections/suspension-1/products/zone-offroad-2-lift-kit-2021-bronco

 

[BroncoZ13]

Thank-you for the complement! here is the link on the 4wp website for the kit: 2021 Ford Bronco| Fabtech 1.5" Leveling Kit - FTL5212 | 4wheelparts.com

Thanks for providing the link. I’ll check with local 4WP about ordering

 

[Alfie623]

What wheels are those? Reminds me of the old 5-slots I had on my 79

They are Indy 101’s made by US Mags, the same parent company as American Racing who probably made the slots on your ‘79. I have them on my ‘83 also.

 

[Alfie623]

More pics please!!!! What wheels, tire size etc.? Looks amazing!!

Here are some pre-lift photos. Wheels are I
Indy 101’s in 17x9, tires are BFG KO2’s in 35x12.5, Badlands Sasquatch suspension with Zone Off-road 1” leveling kit.

 

[Hoghank]

Hank, this is the one I used (2" front, 1" back) https://www.tccustoms.com/collections/suspension-1/products/zone-offroad-2-lift-kit-2021-bronco

Thanks, but will not work with badlands non sas

 

[BstG]

Exactly to each their own,
I am very happy with my Bronco and hopefully you are all happy with yours level or not.
I plan on installing new axles as soon as they are available anyway and in the next couple of years better suspension products will be available also
Spicer Extreme™ Half Shafts | Spicer Parts

Looks like RCV is going to make axles...

https://www.rcvperformance.com/ultimate-ifs-cv-axles-for-ford-bronco-with-m220-differential.html

 

[Clearwater native]

Looks like RCV is going to make axles...

https://www.rcvperformance.com/ultimate-ifs-cv-axles-for-ford-bronco-with-m220-differential.html

Thanks for that info those axles are exactly what I am looking for, hopefully and when the Spicers come out they won’t be so pricey

 

[peterh]

These wheels are the ones I want! Couple of questions - if I went with a 17x8 and a tire width of 11.3 will my setup be two inches more tucked than your set up?

 

[daddycreswell]

Here are some pre-lift photos. Wheels are I
Indy 101’s in 17x9, tires are BFG KO2’s in 35x12.5, Badlands Sasquatch suspension with Zone Off-road 1” leveling kit.

I can only find 5 lug, where did you find 6 lug?

 

[ELKS1]

An

Added Zone’s 1” level kit to my Badlands Sasquatch today. It took about 3 hours.

Do you have any side shots of the Bronco with the slot mags?

 

[Brock9281]

That stance looks perfect. It’s interesting that 4WP did the install. I went to local shop in Austin, TX and they said there isn’t currently a kit for the SAS that 4WP had approved to install? Ford dealer quoted me $500 to have the 1” Zone installed, so considering that.

my Badlands 4 Dr SAS def has a 1-1.5”rake, so I want to install but so many have stated concern for bad angles and actual off road use.

either way, you have a great looking Bronco!!

Did you get Bronco leveled? If so can you say which kit, size, measurements now and pics? Looks awesome

 

[BroncoZ13]

Did you get Bronco leveled? If so can you say which kit, size, measurements now and pics? Looks awesome

No, I never did b/c the 35s feel/look perfect IMO. If I did, I would go with the Zone 1” kit and was quoted from local Ford dealer $500 w/ included an alignment.
Please let me know if you have once done with pics and review as I’m still considering it.

Sponsored