Search results

Like what we're seeing, right now these are my first choice in aluminum for the weight savings, however have to wait and see how the LoD offroad signature series mount before making a final decision. Any chance of a straight in angle picture behind the front tire and same for the front of the...

Wouldn't relocate the air intake for the compressor into the engine air box, with the engine running the compressor won't be as efficient due to the slight vacuum created in the air box. Do see the need / logic for the cooler air into the compressor as the the cooler air will be more dense...

Used 1/2' air brake line to run between the compressor, air tank and the rear quick disconnect mounted on the factory trailer hitch. Started at the compressor, looped the line under the air box intake, then over the mount rail for the compressor then under the wiper reservoir and overflow...

you might try safejacks if you haven't already tried them, they might have what you are looking https://safejacks.com/collections/bottle-jack-accessories

here's an option that's real clear on gear selection from a early 1960's Mopar product, the old push button gear selector

ARB has finally added their 2021 Bronco specific items, bumper, rock sliders and under body armor to their website. Some with more details of the products than what we have seen on some of the vendor websites. https://arbusa.com/ford-bronco/bumpers-protection-equipment/

age? does it really matter? 4-door, planning on some over-landing, more storage space, should be more stable towing platform as opposed to the 2-door tonka toy, in addition the doors on a 4 door are shorter and therefore easier to fully open in tight parking spaces

For all the crap we Floridians get for what happens in the state, at least we are ahead when it come to tags, the dealers if they choose to act as agents for the state are allowed to to issue permanent license plates at the time of sale. The day I took delivery, the permanent tag was installed...

Calibration might be a concern but doubt it will set any codes as I believe the only use of the camera is for the forward view and isn't used by any of the vehicle safety systems. My thinking it's most likely will just be a stitching issue with the 360 view. My goal is not to move the camera, it...

Did some research today, based on your pictures, the connector having a brown color and the alignment key positions, the connector in question appears to be a "FAKRA 50 ohm SMB with a "F" code alignment key housing". However an exact part number or manufacturer is going to be harder to obtain...

Send it

From the body as measured from the hinge 49-1/4 inches or 46 inches past the max rear bumper length, badlands steel rear bumper

BL, SAS, soft top, high point is the rear spar of the soft top it is 76 -5/8" with 39 PSI in the tires

Just a personal viewpoint and experience with gas charged structs Like the ideal of the gas charged structs for all of the pro reasons stated in the thread, but personally will never install them for safety reasons and if I did they would have to have a positive locking device to hold the load...

Yes, took the front bash plate off, starting to look at what's required to custom build a winch mount as I haven't seen an aftermarket winch mount or bumper yet that I will spend the money on.

Here's a dipstick pic, factory fill with approx. 200 miles after delivery

Just an FYI for those planning to carry extra drive belts for off-roading trips. The 2.7 engine has two drive belts, 1 for all of the engine driven accessories except for the alternator, the alternator is driven by it's own belt.

Completed the installation, see post # 2, update # 4 for additional details

Electrical completed today, see post 2, update # 3

Just installed today