Good luck!
One thing for everyone to keep in mind:
As has been said, there is some sort of special tool needed to do the TSB. When all my parts came in, and after reading on this post, I had the service manager double check that they had all the necessary tools. They did not. So, the tool is...
So for those of us less experienced in this, how does the factory capacitor compare to the 600 Hz bass blocker that I put on my 4ā dash replacement speakers?
Do the base system, factory kick panel speakers have built-in capacitors of any sort like the dash speakers do? I don't think so, but want to confirm.
I replaced the dash speakers and used 600 Hz bass blockers to replace the capacitors built into the 4" factory speakers.
If I replace the...
Iām going to get some Krytox to use on the tailgate seal and also the MIC seals periodically.
Do you guys recommend the .5 ounce or 2 ounce size? .5 ounces seems so small, but Iām not sure how far a little tube goes.
Thanks for any advice.
Does anyone know what sort of ārattleā this new TSB is designed to fix?
I have the styrofoam/water bottle sound in my tailgate, as discussed in other threads. Itās more of a faint creaking sound as opposed to a louder metal-rattling sound.
Iām trying to figure out what the ārattleā in this TSB...
Hi, all. According to Ford, the MIC can go through regular car washes. The below SSM also describes the type of products that can be used on the MIC for protection.
Thanks for the review!
So, what's your take on whether the new spring makes it easier (less resistance) or harder to depress the clutch pedal?
Steeda says it makes the pedal feel "stiffer," which I think I'd like. But some of the others seem to be describing this as making the pedal easier to...
Adding my experience with the IAG EZ steps --
I bought a set for my 4-door in early November 2022. After four months on the roads in the Pacific NW, they were starting to rust. Not nearly as badly as some of the photos earlier in this thread, but it was starting.
I contacted IAG and their...