Sponsored

Search results

  1. I Fixed My MIC Top Cracking Issue - Hopefully

    Thanks!

  2. I Fixed My MIC Top Cracking Issue - Hopefully

    Dumb question, is this issue only with the MIC tops? I wanted that top originally, glad they didn't have one I guess. I ended up with the shadow black top or whatever they call it.

  3. Bronco6G Giveaway- BRBN Billet Control Arms + More

    Florida needs parts! 😂

  4. 2025 Bronco Badlands - FORScan Tire Circumference Causing Configuration DTCs?

    Hey @shaw, see above. Relearning PCM and AWD cleared all codes after making the change.

  5. 2025 Bronco Badlands - FORScan Tire Circumference Causing Configuration DTCs?

    2650 tire circumference was pretty much spot on. The speedo registers maybe .25-.50 higher than than the GPS now. For the most part they match right up. I will be curious to see what the values are after using the ProCal.

  6. 2025 Bronco Badlands - FORScan Tire Circumference Causing Configuration DTCs?

    That did the trick! Thank you again. Now we'll see if I chose the right tire circumference after a test drive. All of this is just experimenting at this stage because I grabbed the ProCal tool & tune last night. :crackup:

  7. 2025 Bronco Badlands - FORScan Tire Circumference Causing Configuration DTCs?

    Perfect! Thank you. I will try this in the morning.

  8. 2025 Bronco Badlands - FORScan Tire Circumference Causing Configuration DTCs?

    I'm hoping another 2025 owner can help verify something. Vehicle: 2025 Bronco Badlands/non-SAS Factory HOSS suspension with 1.5" Fabtech level Motegi MR150 Trailite 17x8.5 +18 wheels Mickey Thompson Baja Boss A/T 35x12.50R17 tires Factory BCM values: Tire Circumference: 2525 mm TPMS Placard...

  9. What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

    New shoes and a Fabtech level kit

  10. Capable Bumper questions

    That is sharp! Does Baja Designs also have the mounting plate that you have there?

  11. Capable Bumper - Crash Bar removal?

    Thanks again, once I understood the assignment it took 10 minutes. Should have posted an hour ago before removing the skid plate. :facepalm:

  12. Capable Bumper - Crash Bar removal?

    Thank you @DC5885 and @MNBigfoot. I wasn't sure if mine popped out or not because of the parking sensors and I didn't want to break anything. :)

  13. Capable Bumper - Crash Bar removal?

    I know this is a pretty old thread but is this the only way to remove the front crash bars? Is there no way to just loosen the bumper enough to slide them out? I can't seem to locate where to loosen the bumper bolts. I'll admit, it looks good without the trim but I was hoping for a simpler...
  14.

    Florida Replaced wheels on my 2025 Badlands... selling stock wheels $400

    Price drop to $400

  15. Swing Gate Prop - Looking for one

    Adulting is highly overrated

  16. Swing Gate Prop - Looking for one

    Sticks are the future. Need to poke something? Stick. Need to draw in dirt? Stick. Need a sword, wand, fishing pole, backscratcher, pointer, or lightsaber? Stick. Batteries? Never needed. Wi-Fi? Nope. Durability? 10/10 until snapped in dramatic battle. Humanity built civilization on one...

  17. Old Bronco vs New Bronco — what did each era get right? 😂

    I wanted a '78 or '79 but the 2025 model was cheaper... 😂
  18.

    Florida Replaced wheels on my 2025 Badlands... selling stock wheels $400

    Like new, no dings or scratches 5 wheels & lug nuts (no tires/TPMS) 17x8 - 6x139.7 (6x5.5) bolt pattern - +55 offset Pick-up: Jacksonville/St. Augustine, FL area (located in Fruit Cove) $400

  19. 2025 Bronco Badlands - Suspension / Wheel & Tire Build advise requested

    For the moment I swapped the wheels to something other than the stock. I just did not like the stock wheels at all. I ended up going a different direction from the Method MR305 17x8.5 +25 wheels I was looking at. While I didn't want to go super aggressive 0 or negative offset, +25 started...

  20. Hard Top Lift Recommendations?

    Yep, my MOM got me those too!


Top