Search results

I love these. Saved me digging up my doors a couple of times now

I just bought a 1' USB cable. Wireless charger blows

You can mount the Badlands control module unmolested on the left side of the engine bay using an ARB style mount that is intended to be used with an ARB compressor. See https://www.bronco6g.com/forum/threads/bamf-bumper-outifitted-and-ready.39444/post-1423171 However, if you want the option to...

If you're interested I can give some info about making the Badlands control module work with the BAMF relo bracket which leaves room for the ARB to still be installed. It's a bit of work but for me was worth it to keep the flexibility of a potential future ARB compressor.

I used the relo bracket, but since I used a Badlands winch I had to disassemble the control module, re-work the components to make them smaller, then 3D printed an enclosure for them.

No that's some grade A bullshit. I'd report that dealer to Ford in a heartbeat.

Just installed mine today. Will watch out for creaking. They shouldn't be able to move independent of the LCAs... Maybe some delrin sheet between LCA and armor? https://store.bantamtools.com/products/black-delrin?variant=1148266816

No problem! The mesh is black. Same finish as the other parts.

Sure. Here you go! My Bronco has a mustache in the overhead. I still find the front view very usable.

I really want to order this, I am very happy with the BAMF front bumper, but this sounds not fully baked with the additional hardware required, and need to lengthen the factory studs.

Nice job with the control box... that damn thing is huge. I ended up taking it apart, reconfiguring it, and printing an enclosure for it.

Got mine installed and also no issues with ACC AT ALL.

Also interested in any updates. Also if you could find the time to do a consolidated post of your mods it would be greatly appreciated. Lastly, point me to a "solution" your offering and my debit card will be burning a hole in my pocket.

Love it! Looks great

@yeffaham I would 100% recommend hooking up with Independent Off-Road or 412 Jeepers or Wheelin Upright groups on Facebook to find someone to go with. Also you should match based on capabilities. Sasquatch = Rubicon Adjust according to your rigs clearance / capabilities. And remember we can't...

@nabronco21 There are a few that are still pretty tight. I lost a cover on one of my ditch lights - most likely to a shrubbery / tree of some sort. I had XPEL Stealth put on my Bronco so I'm a little cavalier about not worrying about trail pinstriping.

I should mention I have both the BroncBusterTX tie rod reinforcements and steering rack bushing.

BdyCM " 726-39-01" **xx xxxx xx-- Fog Light Usage: 00=Fog Cornering 01=Fog DRL 02=Fog DRL Cornering 03=Fog Only So set it to 00 instead of 03 in the BdyCM module (not as built)

You can use Forscan to set the fog lights to be fog lights and cornering lights (one side or the other turns on when you turn the wheel) and are below 25 mph.

Did you set them up as cornering lights? Probably my favorite thing about adding fogs.