Search results

Does yours work well/ I installed my Turbosmart bov and I can’t really hear it at all. Also, I thought I needed to remove the tube/hose that runs from the pipe where the bov mounts back to the intake (the 8 inch rubber hose w the 2 spring clips. I thought that was where the air/pressure...

No inspection - I think I will like Michigan!

I used these - for 5 wheels I got 2 sets - they are $101 per set on Amazon.

I had these KMC Grenades on my Jeep - my beadlock rims were stamped “off road use only” which was an issue for state inspection - just an FYI. it is engraved deeply on the trim ring. I know KMC makes a true beadlock (which I had) and a fake beadlock - so maybe the fake trim ring isn’t stamped ...

I’ll hunt one down

Looks like a traxxas. U du u.

I have the weathertechs - in front - and yes, they are ugly and weird. But they are also cheap, durable, and work on my sas bd. No chips.

Did it my Jeep - mounted it inside my spare (37). Worked great. Likely will do it when I put 37s on my bd sas.

Let me know if you wind up moving that hole backwards and cleaning up the front. That’s exactly what my plan is gonna be. Give a little more room to push it forward, and not have that little piece overhanging the bumper

Seems like the bumper would bend to the hoop mount plate - bumper seems like thinner steel than the hoop plate. Think I may cut the front of the mount plate on the hoop so I can move the hoop forward further to give more clearance to the body panel. Did you use the provided ‘L’ shaped bolt...

My review posted - but it was when I got them (before they turned bronze) and I mentioned the dripping, poor quality paint in my pics above. 4WP doesn't care - I avoided them with my Jeep parts as I had trouble with them in the past. Money wasted - hopefully our experience and comments can help...

OK not sure if all these pictures will post in order but here’s what I did. I mounted the GMRS in the center consul. It’s still in the factory bracket so it’s easily removable. To get power to the unit I took the back of the console off where the two rear window switches are. (Pull it straight...

I received the bar today and I’m test fitting it to the bumper. I took some shots for those of you who have a front camera so you can see what it blocks As you can see it blocks quite a bit - but the all around view for parking is fine. The front tire view is also fine. The bumper has a fair...

Look good - not sure if 4 door has the room below to accommodate.

I installed my 575 a few weeks ago. I’ll send pictures when I get back to my house but I wound up putting it in the center consul. Mounted an NMO antenna just near my ditch lights. wire run down center tunnel and enter armrest / storage bin thru the rear - removed covers - you can’t see a thing...

Quick video w cheap fix

Note to self - do not believe ‘never been off road’ ad for EG BD from NY. unfortunately I have experience with running in mud and deep water. Not only does mud go on the floors, it goes under the floors, in the door sills, inside the frame rails, into the harness, inside the doors. It gets...

My bar is scheduled to arrive tomorrow. I plan on mounting it this weekend. I do have a front camera so I’ll let you know how much of the view is blocked with just the bar, and how much room you have for lights.

Thanks for all your help and time taking pictures, I really appreciate it. I just ordered the bar - you were a great help!

I’m 6 foot but it’s not a height issue. It’s a length of your legs issue. I have a short 29 inch leg so I keep the seat base fairly far forward. There’s not much room between the front of the seat and the headlight switch when you get in. Those of you who are 6 foot with longer legs won’t have...