Search results

I had the same issue, no void. I ended up just using the preexisting hole. It feels sturdy even without a bolt at the end. I would be surprised to see if rip off

wtf Ford

ordered

I have my RC High mount currently on a Capable bumper. Only difference seems to be the Capable does not need the washer shims in front vs the modular. I can't see any reason your solution would not work with the Capable bumper, thoughts?

Bought this attachment a few weeks ago, worked great after the last trail weekend to get the mud off the undercarriage. https://www.amazon.com/dp/B08T99WXM3?psc=1&ref=ppx_yo2ov_dt_b_product_details

Looks like Mastertop is getting close to release. I have been checking the Stallion4x4 website periodically, and they just populated a bunch of items (not much detail yet). https://www.stallion4x4.com/brands/mastertop

This RC option looks good, is it solid, any rattling noise on the mount?

Just installed the DV8 Diff skid on 22 Black Diamond, SAS, with rear sway bar. DV8 must have listened on the longer bolts. 4 longer bolts were included along with the 8 std bolts mentioned in the directions(total of 12 bolts). I used the 4 longer bolts for the sway bar brackets that go into...

Ran Spaas Creek and Pumpkin Hollow last weekend (4/22). The heavy rain the night before left Pumpkin Hollow a muddy mess. Luckily was going North to South, so pretty much just slid down the hill, lol. Looking forward to getting back in a few months and running a bunch more of the DBBB.

Looks like Mastertop is getting close to release. I have been checking the Stallion4x4 website periodically, and they just populated a bunch of items (not much detail yet). https://www.stallion4x4.com/brands/mastertop

Hammer and a punch

I bought these, very easy to use. I did get a GMRS license as well, they are cheap. Use them for mainly for spotting, but I like the insurance of being able to reach someone when there is no cell signal. https://www.amazon.com/gp/product/B09BMWNLBG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I might have found one of the very few benefits of the "Capable" bumper, no need for spacers as the front brackets are flat. Didn't need the spacers when I installed the RC high mount.

I have those two underneath like op, also a third up front below my RC High mount winch. I think I am going to buy a 4th and mount it to the spare, be kind of nice to see behind me when I have the top down. This system really works well!!

I have the RCI transmission plate on order, noticed they have cross member skids. https://rcimetalworks.com/product/a-arm-skid-plates-21-present-bronco/

This worked for me. https://www.bronco6g.com/forum/threads/soft-top-rear-corner-rattle-finally-tracked-down-rattle-at-back-corners-of-soft-top-when-in-fully-closed-position-my-simple-fix.50499/#post-1555921

Amp mounted on steering column, easy to run power through firewall grommet on drivers side to battery. Search on here, will find many pics and threads.

I got an update via email last week that says Stallion 4x4 would be carrying them in April. We'll see. I did get a screenshot of what it is supposed to look like, no other details. I don't think it will work with the existing soft top, you would have to remove and buy their combo kit including...

Same engine skid plates as Modular bumper

Here you go