Search results

Well I showed them to the local authorities and they said it was fine but at the discretion of the officer. Worst case scenario , I put back bronco all in white. Either way , I have quick disconnects installed , I can yank the power to it in like 20 seconds or less. I got them off Amazon , they...

Lol Blue yes , red , if it's not flashing I think it's ok. Emergency uses a clear or red clear lens and red LEDs with rotation. It's a bit different than that. We will see.

Finished the led letters. Decided not to do the blue. Also bypassed the start up box that flashes the letters for 10 seconds.

If you are using the existing letters with the red covers and doing your own light behind it. You will have to dremel out the center of the white R , then epoxy the red R over it. Once thats cured. Then you could add a LED or two. If you wanted to do your idea of say have a switchable color from...

I'll be short on this , get the lights , they are good quality. Now on the R overlay letter , they give you this two sides stickie crap , its horrible and will show little dark lines behind the letter and I do not think it will stick well to the lighted letter. Here is what you do , get some...

Well the OBX and NC would be understood to not be the same spacing between the X and the N. SO the space to the right of the camera looking at the front would be omitted. I can just fill in the screw holes with a glossy type silicone or just leave it as is. My grill is a glossy black.

You can get that , the R in what I bought is goofy looking. Looks like an A. However , you can get plastic covers that are Red , then fill them halfway with epoxy , and set the lighted letters inside of that , and you can make that R look like a real R and it will be red. Cant change it but at...

I looked online , it specifically says blue lights , these are white lights with a light blue cover which may be still iffy but it would be a very flat faint blue. I talked to a local law enforcement , he said as long as they are not flashing or very bright and a blue led on clear lens , it...

Being a budget friendly person myself and a do it yourself kind of person. I can tell you of my experience with one brand , Nilight. Find them on amazon , buy a bracket and find the size for that area. You will spend A LOT less money and still get a very good light. I've had two on my kayak...

Yeah I thought of that as well , however , these would come on at start up and they would be constant on after the cycle which only last 15 or so seconds.

Keep in mind the adhesive tape on the inside will be removed and the letters will be attached with epoxy so that the light coming through does not show dark spots. I have Bronco in NC Blue is One , OBX NC in Blue Red Blue is Two , and OBX NC in White Red Blue is Three. Which do you prefer? I'm...

Interior front wiring done for the white LEDs and the ambient blue light. Will take more pics tonight and update thread.

I just watched a video on it but damn that's involved. Have to have a special wheel to mount the solenoids I assume. Then the control screen or maybe not. Air tanks are a option but likely desired. For extreme weekly off roading , I'm sure it's a very favorable system. However I got 1.4 k in...

That would be best but yeah even more cost.

Yeah , setting the psi and go do other things is good just when I come off the road and i go to lower the psi. On the beach , nothing to really do until you get back going. Faster the better for me. I can stare at the gauge for a few minutes.....I can also integrate that as well later on but...

Well , honestly I did not know it was an option but I can say this. Nothing is as fast to deflate as the APEX valves. So waiting for 4 tires to slowly release air , regardless of this system or the pressure control kit is extremely slow. The deflation side will rarely get used. The video they...

well you have years of people before broncos with 4 runners , jeeps and various other trucks using them under the hood and I've seen very little in the way of damage resulting from heat output. The bronco does have heat protection under the hood so while I'll say its not the best location , it...

as much as I can see this from a heat perspective. I am already going to get shit from my wife for the noise it makes when operating so cutting down the noise 50 or 60 decibels , that is a good thing. I can relocate the air intakes if I need too for a cooler air intake which will lower the...

Yeah , got to run all the hose still but sure when I'm done , will be a you tube video.

Morflate is all exterior so when you are done , you have to roll all that up and store it away , I'll only have 4 , 5 foot hoses to roll up which take up very little space in the cab. Morflate is also a little less accurate at filling all tires to exactly the same PSI cause the distance from the...