Search results

I have a two door BD and the hitch bolted on without removing the bumper. No problem

Beautiful. Thanks for sharing Pa. How is your rotopax mounted?

I got the trail tax and am very happy with quLity. The Westin doesn’t seem to come in two door which is what I ride

I could no longer find it at harbor freight website but there are plenty on Amazon /ebay etc. here’s an example:

I got one from harbor freight for my daughter’s vehicle. I tested it and seemed to work fine esp considering how much use it will get. It plugs into the 12volt outlet — no batteries needed.

I saw a video from Sarah n Tuned installing that skid plate set up and did not appear to have a gap or overhang. This pic doesn’t really show it but perhaps you can see the video and decide

I installed a 500 amp solenoid and mounted it just above the power dist unit drivers side. A 2 gauge battery cable for the power lead and the original winch power cable to the other lead. All ends double shrink wrapped And solenoid terminals are also insulated. The solenoid is powered by the 10...

Has anyone considered relocating the E brake switch to a more convenient location? I regularly use it to avoid parking paul / auto transmission issues, especially while parking on an incline. It’s just way too inconvenient to stretch down there to engage and release it all the time, , and I...

👍👍

My 6 cylinder experiences uneven acceleration at times mostly at lower speeds. Not quite to the level of “bucking”. I’d be interested in hearing if your dealer finds anything.

We got a good price from grainger and my local dealer matched it but that was a year ago

I’m planning on kenda’s as well for my non sad BD. Because they are the same width as the standard tires I think the larger circumference will fit without any lift. Let me know how they work out for you

I read a previous post and have experienced it myself when getting into or out of the BD my knee accidentally rubbed up against the light knob changing the knobs position. The only glitch in the system was me

Nice work on this mod. I did something similar and worked out nicely using the oem dash switches. Question: do you still have the factory connector that you cut off? It’s a 10 pin plug (but uses only 3 pins for hot,ground and the purple wire ). If you do are you willing to part with it? It...

i always wave. Used to ride motorcycles, then Miata's and back then, everyone waved. now, its hit or miss. most times as i pass i see the other driver looking down at his / her phone. The world has changed.....

Nice work. I did something similar on my 02 Tacoma— skid plate and a self made gas tank skid plate. i welded oversized washers to the plates where the bolt heads protruded and used a grinder to make then as “domed “ as possible. Saved a few bucks that way

Agree. Finally does doing something about this Several posts a while back referred to it as being a safety issue and might’ve triggered a NTSB complaint which is now being addressed by Ford via this “Customer Satisfaction Program”. My opinion anyway. I’m bringing It in since my wipers behave...

Do you know if the 6112’s are adjustable like the eibachs while on the truck? If not how can we know the “finished” lift before installing? New Hampshire. unfortunately, I didn’t take measurements before making the installations. However, the front is now 1 1/2 inches lower at the centerline...

Hello. Do you still have the factory female plug from the bumper that connects to the harness by drivers side ? If you used deutche connectors I assume you cut off the factory plug(?). It looks like this attached

Thank you for the suggestions. I was hoping to stick with ford performance or SAS takeoffs so as not to void warranty (and to keep cost down!)