Search results

lol! Thanks! Since it's behind the plastic of the center console, the sound gets muffled a bit, you need to go into the midland menu settings and select that audio comes out of the base unit AND the mic - that way you can plug in a little earwig thing and look like a badass secret agent when...

I did a stealth install in the center console behind the USB port. Lotsa room back there.

Sounds like a fuse / faulty connection issue. Check your connections and see if the green light is coming on the Mobridge unit.

YMMV - but when I put in that kicker 8’’, I think the Mobridge pushes a ALOT of power to it - so much so that it overpowers that sub enclosure. I was getting a lot of sympathetic vibrations right at the speaker, not around the enclosure so there wasn’t anything I could do. I wound up tuning it...

I went with Morel - FRONT: 2 x 4’’ Morel Tempo Ultra Integra 402 MKII - (60 watt rms 140peak) 2 x 6.5’’ Morel Tempo Ultra Integra 602 MKII - (120watt RMS, 220W peak) Rear: 2 x SSV 2BR-65A pods (60 watts rms, 120watts peak) 2 x Wet Sounds Rev8 (200 watt RMS / 400 watt peak)

You keep your trans gear display to yourself! This is a family thread! ;-)

I just did a *minor* upgrade of a few things and need to re-tune as well... I think at this point I need to find a shop with mic setups and some smart folks to balance the soundstage a bit better... seems extra thumpy for some reason. ;-)

Ping support and see if they'll remote in and do a "base tune" for you - they did that to me and made my "macaroni art" level of crap tuning sound a LOT better.

No special editions (Stroppe) or anything with a Raptor in it's name.

Here's a short (8min) story on YouTube by WSJ on what parts are foreign made on an F-150. Not directly a Bronco but this should be a decent corollary.

Mobridge is the best plug n play DSP upgrade for B&O systems. Replaces the stock amp.

Kicking around the same thoughts - currently have the Eibach Pro Truck 2.0 coilovers on there... thinking at a minimum would need UCAs, JKS kit and probably a 1'' body lift to clear 37s?

They have it listed on their site - https://additivecaraudio.com/shop/bronco-subwoofer-jl-10tw3/

I built something similar for about $100 for my 2D using pool noodles, PVC pipes, and a furniture dolly. A feature I would REALLY like to see is the ability of the door dolly to hold the doors higher so when I'm putting them back ON they're held at roughly the same height as the hinges...

Def agree that we need 2-3 obnoxiously bright colors rather than 9 shades of grey and blue.

Any love for the humble 2D owners?

Did you upgrade? Curious if you did what you went to - I have these in my rig.

They're quite a bit more "beefy" than the JLs I took out to replace them, but I did get them to fit, no mods. You just have to spend some time spinning and Jenga-ing them for a bit.

Yup - the dash took a little jenga-ing, but they'll fit. I just kept turning them and trying to get them in from different angles until they dropped in. Here's the size comparison between them and the JLs I had in there.

another +1 for the Mobridge DSP plug n play. I went with Morel speakers and a JL sub. Amps: DSP: Mobridge DSP Plug n Play kit - 2300watts/8.1 channels JL 500.1 Monoblock Amp: 500 watts @ 2 Ohms for JL 12'' Sub. FRONT: 2 x 4’’ Morel Tempo Ultra Integra 402 MKII - (60 watt rms 140peak) 2 x...