Iām very impressed so far with our new Bilstein 6112ās. Removing the original front shocks really sucks but the new shocks were super easy to install. I wanted just a small amount of lift and leveling so I went with settings 3 in the rear and 5 in the front to compensate for the bumper and winch...
Iāve read through your post and wonder have you taken your Bronco back to the dealership while under warranty? Our 21, 2 door had a driver door alignment issue, it hit the front fender when it was hot out. I went to the dealer and they sent me to their body shop which was great. We walked around...
If youāre interested I have a set of take offs from my 2021, 2 door with a 2.7L. Approximately 10,000 miles. I have kept our Bronco under coated with Lanolin based coating. You would need to use your retainer caps.
You can have them if interested just pay shipping
I did see that you can only look but no modifying on Apple, I agree I much prefer my Apple products over PC. I have one only used for ham radio programming
Thank you, I will read more on FORScan, and continue to watch the YouTube videos, Iām in the middle of upgrading to Bilstein 6112ās, along with a couple of other things, so sheās sitting on Jack stands.
Thank you Thank you, youāve help make it a little less scary, back up, back up šš¼
Thank you, thatās the one thing I definitely learned while reading.
May I ask how you figure the codes out, such as -
I would like to add front fog lights with the factory switch (I have a new switch and factory harness) I just need to program.
So far I canāt find anything that explains the...
I know this is an older thread, I want to thank you for posting this. Iām working up the nerve to download FORScan, Iām old school this computer tech stuff scares me.
Thanks again
Hi Mike, I found one of your older post talking about fog light instal using the factory harness then upgrading the non fog light switch to the center push headlight switch. An additional comment about updating with Forscan? Iām very old school so I get the part about upgrading the switch but...
If you really want to know the best pressure for your vehicle. Get the sidewalk chalk out mark your tires, drive on a flat surface and look at whatās left of the chalk, if it is even you know the pressure is good. If thereās less on the edges, pressure is to high.
old School trick taught to me...
Yes itās a pain in the A**, but if you just use a short hitch extension that helps.. I agree whoever designed that section obviously never towed anything beforeš¤š¢
I undercoat ours each fall with PB Blaster, you can use NH oil also
I undercoat ours every fall with PB Blaster āSurface Shieldā, there is also NH oil. The spray gun is very inexpensive. Itās easy to do. We have a 2021 and a 2023. Driven in the PNW where our roads have been salted for salted...
Rock flinging? Itās an off road vehicle and tire, thatās to be expected. Larger lugs with larger spacing. Not a street car/tire.
The stock Good Year is a great overall tire for highway, off road, snow and ice. Nice lug pattern and siping.
BFG has not upgraded their tires in years unless you want...
We own a 1977, a 2021 two door and a 2023 four door, both hard tops, both Badlands/Sasquatch. The ride is comparable. I can feel the size difference while driving. I prefer the 2 door over the 4 door for driving, Iām old school. The 4 door looks to much like a Jeep, the size and room for...
Its actually an easy install the table comes with a drill bit stop to keep you from drilling through the outer skin. Just take your time, go slow measure twice drill once