Search results

As noted above, If you only need a 4 pin (which is fine for most towing, and the standard on all Uhaul trailers) I would do it yourself. Here is a video that explains the process

@SLBronco the video linked here might help

Looks like they used a Twisted Shifters 7MT shift knob

Looks great! I go fishing there frequently If you ever miss it, you can check out the live webcam, scroll all the way to the bottom of this site: https://www.brazoriacountytx.gov/departments/parks-department/surfside-jetty

Take it to a Paintless Dent Repair place and get an estimate, those guys can work wonders and might cost less than $500 if only 6 dents on the hood

I agree with @dgorsett : the difference in the two harness part numbers is the position of the pins, not the current draw. So in your case use the halogen (non LED) since that is how your Bronco is originally wired regardless of bulb type used. I sent several emails to Curt back in Dec 2021...

Thanks for the info @Ducati1098, I am going to add a pinned comment to my video noting that.

Let's go! Will DM you

Watch video linked here. Easiest and cheapest way to upgrade tires on the Base. No other modifications necessary: no lift, no removal of crash bars, no rubbing. Still drives great. Speedo adjustment will be required but that is unavoidable with any size change.

Yes, you will likely need to adjust those rubber bumpers in order for the spare to fit properly. But you don't have to replace them. You can just take a sharp blade or razor and trim them down a half inch or so. I did the same and it was very easy to do.

Fun fact I just learned today.... When I ordered and build my 2021 Bronco I decided early on that I wanted to use Jay Leno's Bronco restomod as the template because I thought it looked super cool and I loved the blue. At the time they built it, they referred to the color as a custom color...

That is the Bronco that was the inspiration for my build! Also did not know until watching this just now, the color of Jay's Bronco is the actual Antimatter blue that was released on the 2021 model year. Super cool

Thanks for the detailed post, I am going to give this a try, I have recently started to hear/feel the dreaded clutch creak.

Not just the tires but the PSI that you run them as well....5 PSI difference makes a noticeable difference in feel and MPG

White! But definitely depends on your overall color and trim pieces

You might be right, the programming only required to make it work with GOAT modes and such. Somebody on here MUST have done this by now and could comment on it. I am also a 4.46 and have this on my long term wish list, but will be swapping a 4.46 rear locking axle first (surprisingly about the...

I seem to recall there was a post that indicated there was quite a bit of module reprogramming that is needed in order to make it work properly.

Yes a tool like the one above will help a lot, used with ratchet extensions. Here is a video that may also help:

285/70/17 is almost identical width and diameter

Are you also @mikekellum6238 on Youtube? I just saw somebody asked same question there. I had the hardtop replaced under warranty last year, and I have not gotten around to re-wrapping the top quite yet but I plan to. The original wrap lasted a good 1.5 years before it started to bubble in some...