Sponsored

Search results

  1. De-complicating Audio in the Bronco

    Audio systems start with the input. Personally I wouldn't be using Pac... It's the difference between a Mercedes and a Kia
  2. De-complicating Audio in the Bronco

    This is going to depend massively on personal taste and speakers. What have you got installed?
  3. De-complicating Audio in the Bronco

    They were always amplified however it was by the front ACM @20w RMS ish. Now they are driven off the back, they now would probably be running between 30-40w RMS at absolute best. We are yet to measure this though.
  4. Hi all

    The C2s are only rated to 25w RMS so you'll definitely need to be careful! We push out 70. Also make sure that you have a high pass filter set at atleast 350hz on those dash speakers or you'll definitely blow them
  5. De-complicating Audio in the Bronco

    **2025 Bronco updated B&O** Ok so we have been able to dissect this system and ill outline the differences between it and the old system. There is indeed a new amplifier, now all new Fords received an amplifier update in the 25 model year. This updated changed the A2B (audio bus)...
  6. Hi all

    Sine sweeps and pink noise are both acceptable ways to RTA tune a car DSP. The main advantage is that sine sweeps will also give you phase measurements. However our DSP currently does not have the ability to correct for phase. That being said there are many cars that have won car audio...
  7. De-complicating Audio in the Bronco

    That 4 pin connector that plugs into our amp is CAN from the factory connector. Not possible to wire internally Flick dipswitch 3 up
  8. De-complicating Audio in the Bronco

    Which ones are you running in the dash? Any modification needed?
  9. De-complicating Audio in the Bronco

    I like the Hertz CX100s across the dash and then the MP165 in the kicks. The morels tempo ultras sound better but dont fit in the dash that well. The Audiofrog range is also another great option and they do fit!
  10. De-complicating Audio in the Bronco

    This sounds like CAN is missing. Double check the CAN connection. Flat 4 pin cable that plugs into our unit. Pm me some photos
  11. De-complicating Audio in the Bronco

    ive re-read it and youre right, maybe the title should have been. "Complicating and clarifying audio systems in the bronco" :LOL: I think the main take home point is, if you have a B&O system do it once and do it properly!
  12. De-complicating Audio in the Bronco

    Hi Guys, I get a bajillion questions all around a similar topic so I though it would be easier for everyone if i dump my knowledge into one place. There are 3 audio systems in the bronco: Base: In this system the Heaudnit(ACM, Audio control module) drives all speakers directly, woofers and...
  13. Mobridge Tuning Files

    Send me a direct message and ill get it over to you
  14. mObridge B&O Stereo Upgrade Installation Video

    Great write up! For those on the fence about blocking the sub port I can't street enough how important it is. It makes a huge difference!
  15. What is the latest consensus on speaker upgrades for B&O

    Just wait until you hear the morels if you think those Hertz sound amazing. It will ruin any other Stereo! Make sure you wipe the Hertz tune out
  16. Bronco Plug and play 1150W RMS amp replacement kit for B&O back in stock!

    Yes a video was made last week actually! Will be out soon. Thank you to all that offered
  17. Mobridge Amp for B&O bronco review

    I have heard a whole bunch of different subs in the bronco and I would say the morel is hands down the best. The stinger has the best output for $ ratio though, its cheap for the doof you get. Both hit significantly harder than the Sealth box


Top