Search results

Side BCM Connector BCM Pin Taillight Connector Pin Left (Driver) C2280D (Black 72-pin) Pin 54 Pin 5 Right (Passenger) C2280D (Black 72-pin) Pin 18 Pin 5 The new wire goes into the previously empty cavity Pin 5 of each LED taillight connector. That pin is the dedicated amber turn signal...

Isn't this a threaded-body shock?? Suspension work has already been done.....

You can clearly see various hammer marks on the knuckle from someone doing previous ball joint separation work. Stop it.

Ford does not generally offer factory flex-fuel (E85) capability for EcoBoost engines because the fuel's lower energy density conflicts with the engine's primary goal of fuel efficiency. Running E85 requires30–40% more fuel flow, demanding larger, costlier injectors, and creates significantly...

There is no MAF sensor on the Bronco.

The 2.3L engine in the '25 Bronco is different than prior year Broncos.

Absolutely correct. I made the change back in April and have been flicker-free since then. Slight typo...change "0068 to 0169"

In the BCM sector 726-38-02, change the "0068" to "0169". The flicker is gone for my OEM Halogen-To-LED taillight swap.

Confirmed! In the BCM sector 726-38-02, change the "0068" to "00169". The flicker is gone for my OEM Halogen-To-LED taillight swap.

Great idea! EZ4X4 doing something OEM can't / won't figure out!!!

My Job 2 '23 has always had the rolling rock animation. Wonder if it's a small screen thing.

Slippery mode engages 4H.

My wife ordered and received a Job# 2, '24 Big Bend last August and it's been great for her. She needed gas the other day, and being the gentleman than I am, I said to her "no hunnie, I'll pump it for you" LOL! I get out and push the fuel door and nothing. Now standing there like a confused...

Yes

I thought the 2.3 had spin-on oil filters.

Curious...is there a threshold to our inclinometer? Does it turn "red" when it gets close to the Bronco's roll & pitch design limits?

One thing you cannot get on a Black Diamond is the signature LED lighting. Big Bend you can.

I can confirm that my Job 2, '23 SAS has a rear sway bar. My wife's Job 2, '24 non-SAS does not have it.

For what it is worth....My wife's Bronco was built on 7/27/24 and we took delivery today, 8/20/24. Sync software version 24093, revision 1214.

My wife just picked up her special order, BB Job 2 build with Signature Lighting. I can confirm that the tailights are also LED and not halogen.