Search results

Yep just pop of the covers and remove the inner two bolts from each one is actually pretty straightforward and easy to install.

Just one more day till Broncos and Bikes 23! Hoping to have a good turnout and see lots of Broncos at the track. Supposed to be overcast and cool in the morning so remember to grab a light jacket. Just tell the ladies at the check in gate “I’m here with Ben and the Bronco group” for free...

I got the email today as well….. the second one is not too awfully far from me, just trying to decide if it’s worth the cost.

Only a week to go!! Hoping to see lots of Broncos of any age or trim out at the Motocross track! Saturday practice session will be from 9am-1pm and a first ever Saturday race session will begin at 2 pm. Concessions on site are pretty good but I still recommend bringing a cooler with drinks and...

Can’t speak for the bronco but last road trip I took in my Kia with the 2.4 NA GDI I accidentally filled up with ethanol free in Oklahoma City. car ran like crap on it and it yanked my highway mileage from 41 down to 25 MPG. had to refill in Joplin that run and normally in that car I could make...

Listed capacity should be roughly 80% total liquid capacity of the tank which leaves room for vapor expansion during warmer temperatures. If the vehicle is not perfectly level it can allow extra fuel to be added. Generally the fill hose enters a vehicle tank slightly below the highest point...

I probably would have taken the soft top if it was a factory option on my 2dr. I like the hard top but living by myself with no garage and a gravel driveway, my chances to take the top off are going to be restricted as much as the build options.

Without the light bar and with quick disconnect plugs it would probably be possible to attach or remove it in just a few minutes so long as you had an impact driver and another person to help. Over time though I would be worried about the damage to the bolts by repeatedly removing and installing...

Not really, the underside into the bumper is still completely open for airflow to the intercooler, may cause the active shutters to be open more but I will be keeping an eye on temps when the warm season starts. I could see it maybe causing airflow issues when the vehicle is not moving but if...

Quick assembly step tip for those planning on doing this setup and like me are too stubborn to wait until someone is available to help. It can be installed on the vehicle in sections so long as you do it in the right order. 1 place the light bar in the base. 2 install base with light bar on the...

Here ya go. Just took some today lol.

On-x works fine on my 8” screen. But I don’t worry about road names when I’m on a trail. Can zoom in easy enough to see where I am in relation to the trail I want to be on. I also like the offline ability and will usually cut and download a map using the laptop before I go to a new area. Have...

Installed Rough Country high mount winch plate and 12k winch with 20” light bar this evening. Still need to modify the plastic trim pieces around the recovery hooks but overall I like how it came out. This mount fits perfectly on the “capable” steel bumper. Only issue I came across is I wanted...

Hard to choose. Think these are my two favorite so far.

Does custom emblem count?

Were you able to get power from DRL but off when headlights come on with the fuse tap? Had mine apart last night and while I do have the correct wire for pin 7 it wasn’t hot when the DRL was on. Wanted to tie the DRL setting of my 20” RC light bar to run with the DRL but turn off when the...

That’s what I thought but just tested it this afternoon with left headlight removed, truck running in neutral parking brake released (wheels chocked of course). The right DRL was in but the left side pin 7 (DRL) was cold. Pin 8 was hot in all settings of the headlight switch so assumed it was...

by chance do you know if the DRL circuit is controlled by LIN BUS as well? Wanted to tie the DRL side of my RC light bar into the DRL circuit, but when testing did not get any power out of that pin. Not sure how bright it will be at night so don’t know if I want it on with the parking lights.

If I were to ever have to do it again I’m taking the fender liner out so the bolts I drop hit the ground :ROFLMAO:

Have a 2 dr BD and just got a pair of rhino USA recovery boards, now trying to figure out where to mount them. Don’t want to keep them inside as storage space is at a premium on the 2 door and would prefer not to have them blocking visibility by being on the spare. Anyone have any idea what I...