Search results

Just depends on how OCD you are and your $ threshold. I was in telecom for 25 years and am OCD about wiring and connectors. I purchased Deutsch and Weatherpak connector kits. Honestly give SVP a call, they have a modular system and can get you what you need. Way less headache.

I hated all of those harness that tie into the factory hitch plug. I made my own harness using SVP taillight adapter to pickup stop, running, rev and ground. The hitch mounted C1r bright red is controlled by factory rear fog light switch.

Diode Dynamics C1r x 3

For those of you that use tenders do you notice under hood noises while being charged. Both my ‘20 F350 and ‘24 Bronco have 10A NOCO tenders. The F350 lives on a tender in the shop no where near a key and sits for weeks between uses. I frequently hear both headlight fans and clicking cycling on...

If you had standard lighting before, non LED I believe there is a setting in forscan to change to LED. That might help settle it down

Exactly why I always keep a Garmin in the rig. MANY trails out west have crappy cell service. Never had an issue with the Garnin

On my 2024 Wikdtrak with Lux ordered 1/24 delivered 11/24 built in Nav was not available. I assume some chip cost cutting measures. I renewed the subscription even though I can use carplay and my Garmin Tread XL

Just submitted a join request on the FB page. Thanks Frankie

Great ride Frankie. Been a long time since I rode DBBB. I‘Ve beaten on Jeeps for 30 years. This is my first Bronco. It’s my daily so no major rock bouncing anymore. I’m in NKY if you plan on any more rides. Hit me up.

2024 Wildtrak Ordered Jan 2025 Delivered Nov 1025

I don't believe so. SSC1 - low power backlight and high power white \ C1r - low power red running light, high power red brake light, high power white reverse

Give SPV a call. I'm sure they have experience with 2025. I used their taillight adapter because on these modern vehicls plugging anything into the trailer plug is a hassle. https://www.specialtyperformanceparts.com/ 317-934-6778

C1R has three modes. red running light bright red brake light bright white

I called Diode Dynamics and ordered just the C1r light and plastic hitch sleeve as I was making my own harness. I ordered a pair of C1r from SVP and they came with the mounting hardware and 4 pin Deutsch pigtail. SVP sells complete plug n play harness solutions. Give them a call. They’re very...

The jumper wire I ordered from a dealer. It is posted in this thread somewhere

I used that stud to route a 2g cable to a fuse panel. One fused 8g feeds an MSD Solid Relay under the glove box.

I have 3 C1rs. 2 on the spare an 1 in the hitch. All three receive. Running, rev and ground from R tail lamp using SVP tail lamp adapter. Spare tire lamps get bright red trigger from the SVP adapter Hitch bright red trigger is from factory rear fog light button All three can have white rev...

BD cases are slightly smaller allowing 3 to fit in the bumper. SAE in the middle controlled by factory fog switch everything else is upfitter.

I have never had any issues with my Factor 55 and Crosby gear. Chose an ultrahook for the Bronco

I added some BD S1 with trail lens as corner lights. https://www.bajadesigns.com/s1-trail-lens/?srsltid=AfmBOoowZCOMhqc-WXetTfgmmJCkAgUtfbDotP4ROgUuc2R6AbiE7R0h