Search results

I would not consider this a security measure, nor does he advertise it as such. However, if you have it mounted on the lower bracket setting it does take up most of the open area space. Someone would have to pry there arm down in between a tight fit. That being said, where there is a will there...

Macrame skills?

Did you try the fix for the window rattle and it didn't work? Instructions on how to do that are here on the Forum, took me all of about five minutes when I did it five or six months ago.

From bottom of the basket to the cargo floor, your spread is 18" at the lowest setting and "25 at its highest is what Goat Fab has in the specs. I did not measure.

Installed the Goat Fabrication rear cargo basket.

Does not slide out, it is fixed with three bolts on either side. You can easily remove it, but it is not on sliders.

Don't miss their 23% discount they have going on right now. Makes the cost slightly easier to swallow. I'm a big fan of the product as you can tell.

Mystery was already solved by @Essmith94 , look up a couple posts.

Yes it is adjustable, there are two settings below where I have mine set and it would sit flush with the cargo sides and totally offer sealed off enclosure for the cargo area should your top be off/down. The only reason I have it set where it is, is because I have the rear cargo MOLLE panels...

Yes it works with a soft top. Only reason I know is that there are pictures on another thread showing it installed in a soft top vehicle.

Might possibly be my favorite Mod to date. The cargo tray is so solidly built and fits perfectly. I know very little about fabricating, but even I can tell that Adam at @GoatFab took a lot of time and put a lot of thought in to this piece. Install took all of about 10 minutes. He shipped it...

Good morning Ken, what @604Bronco said, looks like the rubber casing that might be on a vent bezel from inside someone else's vehicle that hitched a ride on Luna.

It's absolutely because you have a MT, all of us that have MT have the same configuration (no spare grommet doesn't matter the age of your build) If you want you can poke through the existing wire harness grommet.

He said we need to wait until he restocks the store, updates it with a discount code and then we need to DM him.

I just bought 6 packs of Mcgard (4 in a pack) as @Roger123 suggested and one set of 5 Mcgard lockers. Granted you will have two spare regular lugs, but is is a nice set up and so what about the spares. Winds up being about $115 bucks which is what Ford wants for their crappy ones.

I will await an updated discount code. Thank you.

He is talking about the Raptor. I have leather in my 2022 Badlands and it most assuredly does not have a stitched dash.

That's just the warranty he chose there are bunch of different lengths and different deductible options as you would think. For instance, I got the 8 year 100,000 mile warranty with a $100 deductible from Granger on this forum for something like $1,650.

@EIGHTLUG Curtis I am in when it is time. Thank you as always.