Sponsored

Search results

  1. Portable fire pit recommendations?

    A friend of mine gifted me one of these, Fireside Pop Up fire pits. They are awesome. They're light weight and compact, will hold a huge amount of fire wood. They have a full line of accessories, you can turn it into a grill, they have a fire blanket to bank it when done. I wore out the bottom...
  2. Towing 3,000+ lbs - Actual experience input requested

    Nice camper upgrade from a pop up. You may want to research different weight spring bars.....something closer to the actual tongue weight. The correct weight spring bars will allow the weight distribution system to be more compliant, and fine tuned to the towing configuration. EAZ Lift...
  3. Towing 3,000+ lbs - Actual experience input requested

    @23OBX2.7 There are not any lowering mods for that suspension type that I'm aware of. The camper rides extremely well on the independent coils, it is a relatively sought after suspension system. I don't want to loose ground clearance on the camper, we will be camping off the beaten path at...
  4. Towing 3,000+ lbs - Actual experience input requested

    We tow an R-Pod 153 DSO, it's 3k dry weight. We normally fill the fresh water tank upon arrival to the campground. Ordered the Bronco with the factory tow package. Swapped all of the coil overs to Eibach Pro Truck 2.0s spec'd with additional load carrying coil springs. 500lbs in the rear and...
  5. Broncos Pulling Trailers Pics - Add Yours

    No factory brake controller. (not offered on the 2023 Bronco). My Bronco had the factory tow package, it does not include the brake controller. I had to purchase an aftermarket Redarc brake controller and install it. It is "plug and play" the wiring connector is already there. All my older...
  6. Broncos Pulling Trailers Pics - Add Yours

    No additional wiring required to be run to the trailer, if you have factory tow. Mine works as it should,
  7. Lightweight Overlanding Camper/trailers ideal for BRONCO

    Is that your camper Tricky Mike? Definitely needs a weight distribution hitch. A bit too long for my liking to be towing with a 2 door.
  8. Lightweight Overlanding Camper/trailers ideal for BRONCO

    Not cheap, but full of awesomeness. It does come with the hitch ball installed. To weight load the bars you just lift up the levers and install the clevis pin, no pry bar tool involved to lift the bars on the perches.
  9. Lightweight Overlanding Camper/trailers ideal for BRONCO

    If anyone is looking for an M1102, that is a great price. that white and black paint job is worth $500 alone. The trailers will normally bid up to 1300 or so at auction.
  10. Lightweight Overlanding Camper/trailers ideal for BRONCO

    Curt Tru Track I bought some much lower weight (600#) spring bars to use with it. I like the fact that the spring bars and everything stays on the trailer when un-hitched
  11. Transfer Case Output Shaft Seal Leak

    That's unfortunately becoming more and more prevalent, incompetent or uncaring workers. They are giving the really good technicians a bad name, and making it more difficult for customers to trust repair of their to the Dealership. I know when my rear locking differential did not not work with...
  12. Transfer Case Output Shaft Seal Leak

    Are you under warranty? If so-Just have the dealer perform the repair so that it's documented.
  13. Broncos and Fishing - Let's see your Beach Buggies

    Of course, always try to build not bought. Was in a time crunch and just did a quick basic design and cut them out of some 1/4 aluminum.
  14. Lightweight Overlanding Camper/trailers ideal for BRONCO

    Rpod-153 DSO- Beast mode, trailer has independent, coil sprung suspension, definitely a couples camper. Could sleep three. Our main requirement was a dry bath, separate seating area from dinette/murphy bed. The camper weights are reasonably below the Bronco towing capacity. Using a Curt WDH...
  15. Transfer Case Output Shaft Seal Leak

    2023 Badlands 2 door, 2.7, stock suspension. I just joined the club, less than 6k and I noticed the classic rotational fluid splatter on the chassis. I was able to request the dealer order the seal before I brought it in for repair, since they don't stock it. It took a bit of convincing. They...
  16. Eibach has FINALLY released heavy duty springs for the PRO-TRUCK COILOVER 2.0 for the Bronco

    They do offer "lift" springs to fit certain factory shocks. https://eibach.com/product/E30-35-056-01-22?epsid=2961
  17. Eibach 2.0 with HD springs E86-35-056-05-22

    I'll be installing the Eibach 2.0 with HD springs in the next couple of weeks. Caleb with Panda Motorworks gave me a great deal on the set, less that an Old Man Emu HD set. Thanks PMW. 2 door Badlands non-sasquatch, 2.7, rear seat delete with a cargo drawer in the back, ARB summit front bumper...
  18. Bronco Raptor hitch DIY install with pictures

    @Farmerjack How loud is the Borla muffler? I prefer a quieter exhaust, nothing worse that a loud exhaust drone on a eight hour drive.


Top