Search results

It would be great if all 11 of us (or 10 not sure what happened to lined out Dan) could show up for the event.

The Bronco Vs Jeep Day looks like it will be happening on May 4 in Perry, Ga. It's a bit of a drive from Tallahassee. It is 150 miles from my house and Google Maps says it will take about 2 hours and 40 minutes or there about. Last year was the first time and it still had a good turnout...

Earlier this week, I was watching a video on Youtube by Krista of Buckleupoffroad. She said that the Flashcal for Bronco is now updated for 2023. So I ordered and it came this morning. I plugged it in to my computer so that I could update it, if needed. It appeared to need it. Using it was...

When I replaced my standard plastic bumper (with fogs) to a modular bumper I added after market fogs and used the original wiring harness to connect them to the stock fog switch. I have a 23 Big Bend mid package and I didn't realize until this past weekend that I had auto-sensing bright lights...

I ordered the ASFIR Fuel Tank Skid Plate. This is a 1/4 inch thick aluminum skid plate made up of two plates and 6 hangers. It arrived very quickly from Israel via DHL. Installing this was surprisingly easy. Only took 30 minutes according to the instructions, however, I seemed to have...

After adding the table to the rear door, I pondered what to do next? Well, why not try the Gearshade Limb Riser Kit. I have to admit I'm not likely to every be in a position to use the kit but I liked the look so why not be a poser? LOL. Installing the US made kit is pretty straight forward...

I added some more edging to get rid of the electrical tape I used. Didn't really need the tap as nothing touched. I added the edging to the two sides and along one edge that wasn't mentioned. Anyway, no noise from it during two 4.5 hour highway drives. Nor banging around in my "hilly" yard...

Well, why didn't I think of that? LOL. I went out and took some pictures and added to my original post.

You can also get this magazine thru Zinio which is a digital "store". I've had that issue for a long time. Disappointed it is only a Tread special and not a thing. Since it says Winter, maybe it will become a quarterly?

Added an inexpensive tailgate table to my Bronco. It is cheap at about $110. Has pretty good instructions, which could be a bit better. All hardware was provided. There wasn't enough rubber edging to fully follow the instructions. I made do. So far I don't hear any rattling. I was going...

Ever since I bought my 23 Big Bend in March 2023, I've seen people ask about interior ambient lightning. I've seen items for sale. Well, I couldn't help but notice that the Bronco has ambient floor lighting. At least in the front. It was set to minimum and I moved it to maximum. Nice. 2.3L...

Well, do I need a catch can? The J&L is a quality product to be sure. I checked the can 500 miles and again after another 1000 miles. There is basically no liquid in the can but there is a fine coating. So it is catching the oil. Not sure how many miles you have to drive without one to see...

Well, after chatting with Flip, it appears my sensors will not work with the Fab Four Vengeance bumper. I see other steel bumpers that use the same sensor rings that came in with my OEM plastic bumper. Not really looking to purchase another steel bumper. So for now I've turned the sensors...

Nice list. I have the Helm book , the floormats and I found that that most of the choices for flaps were either ridiculously expensive or too cheap to consider. I went with BroFlaps, found Etsy. There versions for the SAS and the non-SAS. The owner was very helpful when I dumped my rear...

Well, why do we have 4WD? That's a lot of weight to carry around for no reason. Why not just a rear locker (if that) and call it done. Have your every driven the ALCAN (Alaska Canada Highway)? I have, twice. I've seen a couple driving a Suburban and they hit some road trash and it punctured...

What I did was remove the harness from the old plastic bumper with fog lights and match the connectors. I believe I used these to run to some aftermarket fog lights. https://amzn.to/47HH53b I used a different connector for the Mabett lights but I tied them into the AUX switchs...

I replaced the front bumper without any real issues, of course my BB trim level at Mid didn't have the front sensors to worry about. Now on the rear bumper. I replaced the cheap (quality) plastic bumper with the Fab Four Vengeance bumper. Instructions were clear enough on removing the...

I don't really like the Pavlovian dog treatment of having to remember to push two buttons when I drive the Bronco. One to start it and one to stop the auto stop start system. So I went with this little box. It mounts under the dash to the left of the drive. It really is plug and play...

Here are some more pictures of my Chinese "OEM" HD Modular Bumper installed with the RC Mount, Warn EVO 10S, Mabett off road "fog" lights and fog lights mounted on the bumper with Tricky Distributions mounts (connect to the stock wiring so that it operates from the Ford fog light switch). For...

I will take some pictures today. That coating is some good stuff. My experience is that it wasn't going any where so no I didn't do any prep except maybe to dust it off. I keep it garaged but it has been in the rain on road trips. No rust that I recall....except from Ford production in other...