Search results

It was 40” from the switch to the bumper. I’ll have to measure the hose from the compressor to the switch.

The Anker alternator charger just became available and can reverse charge to the car battery if your power station has a expansion battery port. "When the Reverse Mode is enabled, your power station will charge the car battery. This mode can only be enabled by connecting the power station with...

They are position sensitive. There is a post where someone said the HD springs put his shocks above the ride zone into the rebound zone. I have added the missing bash plates and a lot of other things, but still have the plastic bumper. The Zone lift is engineered to be a companion to the Fox shocks.

I am torn between the Eibach HD springs or the Zone Offroad lift for Hoss 3.0 Bronco's. I am nowhere near level since I installed a winch. The HD springs might take the rear shocks outside the ride zone when I'm not loaded down. The Zone kit has pucks but is supposed to keep the shocks tuned...

I was going to mount to a overhead molle panel, but I'm worried about it getting stolen when my top is off. So, I'll probably go with the M2M hidden mount. Easier to install there too. I was going to get the MTX575, changed my mind when I discovered the BTECH 50 Pro. Has Bluetooth, phone...

When you disconnect the plug on the passenger side, does it completely kill power to the license plate light? You may have to de-pin your connectors to figure this out. Would it click with no pins? Maybe one of them is not seated fully? There are posts on here detailing the connectors on the...

I just noticed two things on the Ford Performance website. The hardware (Procal delivery tool) is now being sold separately from the tune, and the non California tune is "sold out."

I contacted Factor 55 and they sent me additional stickers and rivets.

Instead of changing the fairlead, just cut the line and splice the thimble back in. Very easy to work with synthetic rope.

Ultrahook. Spray painted the rope guard. The color almost matches, it looks better in person.

It comes with a ton of wires that are not used unless you have air lockers and the instructions are not terribly clear about it. This is what I had left over after I installed mine.

I had the exact same problem with the driver side and broke the connector trying to get it to "click." Wound up cutting it out and using weatherpacks. Later, I had the passenger side apart and it wouldn't click into place either. That's where I used dielectric grease and it solved my problem. I...

https://www.bronco6g.com/forum/threads/rear-license-plate-light-fuse-location.53567/post-2295587

This picture is from American Adventure Lab's website. Yes, that is a jeep, but it does show how it mounts and how much clearance is needed. @Rivers90 , let us know how it works out. I plan to install on a DV8 overhead molle.

I have mine wired so the backlights will come on with the running lights at night as well as from a upfitter switch for daytime use. If they are both on at the same time I get this trouble code. You may be back feeding to the running lights? If the lights don't come on at all it's something else.

https://rammount.com/products/ram-b-367b-m6u From RAM website From RAM website On my dash, from RAM stuff I had laying around. Yes the magnet holds strong. Cheap mag mount I found on Amazon with RAM ball and arm. (Work phone mount.) It's down low so the phone might not fly out the...

https://americanadventurelab.com/product/starlink-mini-overhead-molle-mount/

Is there a way to hardwire a power cable?

Dielectric grease.

I believe this is triggered by not having to make any corrections. My Bronco's steering is tight, and it tracks perfectly. I get this warning on long stretches of straight roads. Doesn't really matter if your hands never leave the wheel.