I bought a set go your mud flaps off Amazon. I installed them today without issue. What I would like to know is what size are the clip nuts you used? I am wanting to replace the last plastic pin with a bolt and nut to make it easier to remove the front flaps.
Well as the title states, why are there no nuts on the extra two positive battery post? I am wanting to add a few things to my BL. I need to go to the battery for a set of jumper cables to a quick connect Anderson connector. I popped the hood unlock the positive side cover and discover two...
Alright I am trying to figure out which size relay to use to power a winch. Looks like I will be getting a 9.5K winch for the front. I want to power it off one of the AUX switches, so I will need a relay. The issue I am having is getting a real answer. I keep seeing isolators and new...
Howdy all
I have a 2023 OBX Non Sas. I am wanting to lift it, get skids for it, and a winch. I want to buy once so I am making sure my ideas are going to work together. The lift is the part that I have a few questions about.
My plan is lift it about 2 inches or so. Currently I am going to...
Just noticed they released a newer version today. I have not downloaded it yet, even if I do I will not have time in the next few days to see what they fixed. If anybody downloads and test this, let us know if the A>S>S can be shutoff.
I just went to get the paper work done on ordering a 2 door Wildtrak. I was told they can not order 2 doors currently.
I guess I will have to wait even longer)-;
I am really wanting a 2 door Wildtrak in Hot Pepper Red. I would want the hard top as well. The Lux package maybe.
I have a 4 door Outer Banks I really like with the soft top.
So the salesman I know called and said be here on the 27th at 0900 to order your 2 door. If I order one how long...
After missing out on a set of take off SAS coil overs I figured I would just suck it up and buy the shocks and do it myself.
I am seeing the Bilstein 5100 listed for the Non SAS and the 6100 listed for the SAS package. I would like the larger shock or the 6100 if the springs will from my...
I have a lead on a set of take off 2021 SAS Bilstien suspension coil overs along with upper control arms, tie rod ends and looks like rear links. Would this raise my OBX about an inch or two? What else would I need. Also is $400 a good deal for this?
Thanks
All right I am looking for a cheap set of covers I can install when I go out and play. I want them to fit pretty good while they installed (not bunched up and uncomfortable). Easy to put on and take off when not needed.
Any ideas? I have use beach towels in the past, but looking for a little...
Well last weekend I took my OBX out for some fun in the mud, and rocks. I must have caught a pretty big rock to cause this damage. So I was thinking maybe getting another set of rims and tires just for playing. Anybody doing this? Also these scratches on the rim are fairly deep, should I try...
So I went out playing yesterday and got my OBX sort of muddy. Here are some before and after pictures. I use a soap canon on the outside, and a Tornador Z-020 for the inside. If you haven't used a Tornador for the inside you are missing out. Here is the one I have but search Amazon for...
Sort as the title states. The last lift I did was on a 1980 F150 it was a body lift so I could get bigger tires under it.
Today I decided I needed a bit of a lift for my OBX after I got high centered and had to be pulled up the hill. I am going to stay with my current wheels and tires, basic...
Well I meet up with @Valhalla this morning at Windrock. I was worried my stock OBX wouldn't cut it. It did pretty well for the most part. No skids or lift. I got high centered and had to be pulled up the hill one time. Other than that a few hard hits to the bottom a lot of mud tossed.
I...
A few weeks ago I asked about sliding out the rear window. The problem I was having was it would not slide out without pushing down on a bracket. I got a call from the body shop today to bring it in and let them take a look at it. I showed them the issue, and they agreed it was bent. We took...