Search results

The SAS wheels have too much positive offset I have 0 offset and no rub

I cleaned it with 70% alcohol then lightly wet sanded 400 grit don't sand too much you don't want to remove any existing paint. Then cleaned it again and sprayed it two to three coats of each.

Thanks, I will be posting a thread with more details. I made the base out of aluminum then added Ram Mount rail and accessories.

Good luck on your delivery and it would be nice to have a NJ meet up

Yes i love it too. I saw that kit i might check it out.

On the road i have absolutely no rub. If i need to in the future i will add more lift

Thanks, I completely agree it was rust oleum high etch primer, satin black and satin clear

Thanks, yes crash bars removed no rub. I will be doing some off roading but not alot if I need I will add more lift. Just trying to maintain the factory ride as much as possible. Actually with the 37's it's a little better then the factory ride.

Thanks might be going to the pine barrens the end of July if so I'll let you know if you want to join us.

Thanks, no rub on the street. Haven't been off road yet but did flex it and at the point when the rear tire loss contact the tire just touched the front crash bar bracket at full lock. rash bars were removed

Thanks it was just all Rust Oleum self etching primer, satin black and satin clear coat it's been done for a few months and seems to be holding up well.

Yes the 37's gave it a nicer ride and the BFG's are c rated so that contributes to the softer ride.

Thanks I actually had to do it. I ran into a shopping cart and knocked the B out of Bronco so I came up with that instead of paying $500 for a new grill.

This is my first post had my bronco for 5 months and been lurking on her for 10 months. Here is a quick rundown. Reserved June 4 2021 ordered Badlands, sasquatch, hardtop, 2.3 , high package, with tow. Waited till September then removed the hardtop, sasquatch and tow and switched to the 2.7. Got...

Badlands non sas 17" 0 offset 37" BFG KO2