Search results

Question for the group: would you recommend installing these on a 2023 Badlands with Sasquatch package and keep the OEMs as spares for the trail? Or vice versa? I have not modded the OEM suspension at all if that matters.

Is the dash and center armrest material a soft touch plastic or vinyl? Trying to compare to my 2023 with Lux/leather package that has a harder light grey plastic dash. I assume so if has stitching.

Where in California are you located?

Do you find you have to use a bit more force to get the tailgate to close (when the lid is on)? Mine definitely needs it, and there’s a much louder “thunk” sound like the tailgate is hitting the rubber part of the lid. Maybe I need to adjust it a bit. Also, what’s the cover you put on the...

Thanks. Two more questions if you don’t mind. 1. Would the Hoss 3.0 setup provide the same ride height as my current Hoss 2.0 on Badlands/Sasquatch? I have the OEM heavy duty bumper on the front and there is definitely 1.5 to 2 inches of rake I’d like to get rid of (in addition to benefit of a...

Sent you a message. I’m interested and can meet up today.

I’m going to demonstrate my ignorance with this question, but what is the difference between buying the parts you’ve listed vs. bring a coil-over set like the following: https://www.shocksurplus.com/products/fox-2-5-performance-elite-coilovers-set-2021-ford-bronco I assume it’s not just the...

Attaching a few pics of the issue I’m having, but not sure how clear it will be. The right side sits too low such that the tab on the right side of the table doesn’t sit in the slot. I’m not so worried about how level the table is (I’m probably never going to be using it on perfectly level...

Ditto. Installed Performance Tune last week and the lag is gone. Much smoother shifting, particularly in lower gears.

It’s not the clamps. It’s the tabs on the bottom shelf that are supposed to sit in a slot on the side pieces. From what I can tell the screws that attach the bottom of the side piece to the main frame are keeping the bottom shelf from tilting all the way down to level. I’ll try to send pics, but...

I bought this too and installed this weekend. For some reason my lower panel doesn’t rest completely flat and the tabs on the edges won’t sit in the slots on the side pieces. Curious if you had a similar issue.

I was able to test Auto Hold on my commute to and from work today. Worked pretty seamlessly and really like this feature. I’d note that there doesn’t appear to be any indicator on the dash that Auto Hold is engaged. I thought I saw an indicator in the video posted by the earlier member, but I...

I was able to get Auto Hold to work, although only tested briefly in the confines of my garage. As others noted, it was just a matter of enabling the feature in the easy version of Forscan in the APIM and IPC sections. I don’t know if any of my preceding changes to enable stop and go function...

Wow, thank you both if you managed to figure this out. The other day, the sunlight hit my center gauge cluster at that perfect angle where you can see the location of all the analog unlit warning lights. I was focused on the right side of the cluster and didn’t see “Auto Hold”, so I had almost...

Would you consider selling the Fox suspension parts separate from the tires/wheels? I already have a SAS package on a Badlands.

Thanks. Managed to free the passenger side after 20 minutes. Used a small 90 degree pick tool to force it through. Will try pliers on driver side. Wish me luck…

I found the factory harness for the fog lights behind the shackle mounts. Question: how do you loosen the plastic pin that attaches the harness to the bumper (see the circled part below in P's original picture)? I tried using a trim panel tool to loosen the pin from the front, but the tabs at...

If you’re going for the basket that has the upward curve, I think you’ll need some kind of hitch extension (even without a drop). Or you could get the basket that has the straight piece. It should sit low enough that the rear top of the basket shouldn’t hit the bottom of the tires.

With a 35” inch tire (stock SAS on mine), I wasn’t able to open my tailgate. I also couldn’t fold the basket upright because rear edge of the basket comes into contact with the tire (when you fold it). Come to think of it, I’m not even sure the basket’s extension would reach the pin slot in the...

I have a related question. I am planning to install the Harken hoist on my garage’s exposed pitched ceiling. Would it be safe to install the hardware (believe it’s just the screw with a hook/loop) directly to the angled rafters? I circled the contemplated mounting points below. Should I...