Search results

I think you are giving up the strength of the larger wheel studs (I think they are larger) What brand of adapters? Are they made in the USA with known materials? (not knocking what you have, but I haven't found USA made stuff in my searches for less than $200 a wheel)

And who is going? I will be there Wednesday through Friday.

Bolt pattern “challenge” = not worth the effort. You will need adapters that are going to cost at least $800-1000 You had better get those Raptor wheels for free. bumper should be a bolt on if you get all the pieces

Because its about $1500 overpriced..

I concur. Disregarding price, the best you can buy for coverage and strength. UHMW makes crawling more pleasurable with no metal grid if noises. 1/4” marine grade aluminum for strength and no corrosion

I am running two valve stems, monster valences and shorty steel valves with the TPMS sensor. Any machine shop can drill the holes

Any update from Foutz?

Anyone around Seattle/Snohomish with 37s that would be will to help me do a test fit? I would even take an unmounted tire in desperation. Ideally we just swap wheels around and I use a jack to check clearances...

Does a body mount kit (JKS, LOBO or ?) I am thinking about adding Trick Dicks frame braces (they are built better than ones I made when I mounted my winch) the Lobo kit seems a bit much. JKS includes the rear liner. Just wish there was a trueish 35/36 that would work.

I have a FE with Bilstein 6112s (circlip 4 up front, 3 in the rear) Which Bilstein says gives a stock Bronco 1.5" of lift. I have true TrailReady Bead Locks at 17x8 with +19mm of back spacing (compared to stock at 17x8.5 and +30mm) I think that makes my wheels stick out about .5". Is that...

Will they fit over the models that have factory skids?

Anxious to find out.. Its on the list of needed upgrades.

Sent a PM to them asking..

I just looked at the Carli ones and asked them if they would work with the "factory" skids that Badlands have (don't know if any others do) The Foutz are $$$ at almost $500, the Carli's look promising except that they don't have the UHMW.

You have the factory"skid"which obviously is not enough. Foutz MS makes one that will fit. https://www.foutzmotorsports.com/collections/2021-ford-bronco-parts-and-accessories/products/2021-up-bronco-rear-lower-arm-mount-guard-with-hdpe-slide The ASFIR ones WILL NOT fit over the mounts that...

Every vehicle that I have had the windows tinted has come with instructions to not lower the windows for a couple of days after getting the tint installed.. Ho do you handle this with the auto down?

I have no interest in a tire carrier solution, just looking for high clearance and something that protects the rear corners from drop offs/departure angle issue. Of course I don't want any unnecessary weight either. I know that bumper preference is alot of looks and a lot of personal...

Expectations should match the rates being charged as well. If we are paying $200 per hour for service, I expect a premium experience. No doubt that the service techs/porters/parts counter people all need living wages and be paid for what they do. It’s expected that the dealership management...

I am thinking of taking the plunge and upgrading to the full Weld74 kit. I am fairly handy mechanically and electrically. I have installed my suspension (Bilstein 6112s) other bolt ons and have all the tools imaginable. can it be done without dropping springs/shocks/axles out? If that was...