Search results

WTS OEM HOSS 3.0 Fox coilovers from my ‘23 4dr Wildtrak. 5k miles on them and ride great! I went with an adjustable ADS Coilover setup for my lift. Local pickup in DFW area only, but may travel up to 1 hr with proper offer. $1800 OBO Reduced: $1650 Local pickup. Serious inquiries only and I...

‘23 Wildtrak black/black wheels/rings and 35” 315/70/R17 tires. 5k miles on 4, 0 miles on 1 spare. TPMS sensors removed. Local pickup in the DFW area, but would be willing to travel up to 1 hr with proper offer. $1800 OBO $1700 OBO $1600 OBO $1500

With Hoss 3.0, I dropped 1” in the front with a 75 lbs winch. Winch is a Smittybuilt X2O Gen3 12k.

I feel bad for the OP, but this is the exact reason I’m glad I stuck with the Wildtrak instead of the Badlands I orginally ordered. Simpler ways to address the disco… Interested to see how this turns out though as many of us are lifting/modding, best of luck OP!

It doesn’t help y’all much, but this is what I ended up doing. The more I thought about what I wanted to do with the Bronco, the more a full adj. coilover made more sense in the long run…so I bit the bullet. It’s getting aligned now and I only have a few miles in it since I installed everything...

I went to AutoZone and got ~3’ of hose (take connector/hose with you)and swapped 2 of the connectors around to extend the hose length. I removed one short length of hose, took the connectors from it to use with the new hose. I actually used the new hose to drop behind the grill from the top of...

I use it all the time, on and off road. It works great in low and making sure you’re taking the right line. It’s awesome to be able to have that perspective of the trail too. The camera washer/sprayer is nice for those mud bogs, which I didn’t even know it had for months…. It’s also great for...

Looks like a good design. I assume tube doors would also work? $500 for 4 door setup is a bit pricey compared to the competition.

Have you had these in the rain yet, how are they in the wet stuff? How's the noise on the highway compared to the stock Territories? I'll be going with either the Baja Boss A/T's or these M/T's. I'm finding tons of reviews of the A/T on/off-road, and only really off-road reviews of the M/T's...

I did this same procedure to get my rear fogs working with the new OEM switch M2DZ-11654-CC: And using these terminal pins: However, I figured out how to open the connector and add the terminal. Thanks to @flip for helping with the parts. You’ll need to remove this grey retainer clip with...

@Fun-Haver Off-Road I sent an email a couple weeks ago about the tuning/valving on the Fox 2.5 Elites, but never got a response. How does the tuning/valving differ from off the shelf? What lbs spring do these come with front/rear? Do you offer spring swaps for heavier weight And aftermarket...

Question/Response #3 With your satisfaction guarantee, if these don’t work with my coilovers and suspension setup, I can get a full refund without issue? JBA response: That is correct. We`ll work with you to make the combination work, swap arms if necessary etc. and if you`re not 100% happy...

Question/Response #2: Regarding #3, please confirm the caster built-in on the 1-4”? For the 4-12”? Your site says 3* in the faq for the 1-4”, but it does not say for the 4-12”. Regarding #4, but these do not have the same HD gusseting/bracing. What is the DOM tubing size? Do you offer any...

FYI - Some questions/responses from JBA: I will going with aftermarket coilovers with reservoirs, will these have enough room to clear the fittings/hoses? Will these clear factory offset Sasquatch wheels/tires or are 0 or negative offset wheels required? Are there any caster degree differences...

Thanks for your input @Snacktime This helps a bit… I also want tubular and I figure more adjustability is not always better for Offroad…more things to go wrong. Plus, you have to find someone that will adjust them properly… So do you think the JBA’s with 3* caster built in are too much?

In follow-up to my #1, I found this to be one of the most informative...and why I'm questioning how aftermarket UCA's would help the CV's if you're still able to align in spec with OEM UCA's...

Alignment specs from another thread:

I've read a lot of threads on this and seems most are able to still hit Ford's specs with up to a 1.5"-2.5" lift and stock UCA's. I keep reading about our CV's being short and aftermarket UCA's can help with the bind, but how? It would seem CV bind would solely be based on the amount of lift and...

That sux man. Here’s what mine look like.

@bozley_snipes How do you like your JBA UCA's? I know they're popular with the Yota/Taco groups. The 90* range of motion and ease of ball joint replacement are nice. Could you share some pics of your setup with the JBA UCA's? I was considering these or the Icon Tubular DJ Pro UCA's for my...