Search results

I put aftermarket wheels and tires on with new TPMS sensors. They worked for about a month, then all of a sudden they all stopped working. I have a tool to reprogram/relearn the sensors. When I go through the process, the driver's front programs/syncs fine. The passenger front is next in the...

Was out for a drive tonight, and my wife says look at that house they have two Broncos. There was an OBX in the driveway, and a Badlands in the garage on a lift. I turned around and saw a guy wrenching on the Badlands. It had a ton of mods, so I stopped to see if he’d let me take a look...

$175 for 4 doors.

Kenda tires make a 35x10.50r17 that would work well.

Bump.

Overall I'm really happy with my Bronco. Only two gripes, which are pretty common and people have had mixed reviews on their dealer being able to fix. 1. Heater does not blow air on the floor in the front or back - the air comes out the defrost. 2. Window drop not working as expected when...

The process before you apply a ceramic/graphene coat is to wash, clay bar, polish, clean then apply the coating. My Bronco was in pretty good shape, so each step was pretty straight forward. Probably took about 6-7 hours total. However, others on here have had rail dust, paint swirls...

Yes. Ford has two bug deflectors. This is the textured trail armor one. Bonus was I got it using my Ford pass points.

The coating on my Bronco is the one and only time I’ve done a coating like this, so I can’t really compare Adam’s finishes to any others. I think it turned out great, and only time will tell the longevity. I do think you have to be cautious of reviews sometime. When I was looking at the...

I think this is the key. The prep is where it’s at. You can have the best coating in the world and it will still look and perform poorly if the prep is not done correctly. The coating I applied only took about an hour maybe an hour and 15 minutes to put on, but the prep took the better part...

I didn't know there was an original and advanced. The one I used must have been the original.

I used the Adams graphene product you have linked. I think it turned out really well.

I don’t hate it.

Unfortunately no auto function.

I'm not able to unselect all the vents. One button always stays lit no matter what I do.

I'll have to take a closer look at everything this weekend and see if there is anything obvious. Thanks again for your help.

I took delivery about 3 weeks ago. The first week or so, the temperature was pretty warm so I didn't notice anything. When it turned cold again about a week and a half ago is when I noticed it. I would say it's probably been like this from the beginning. I did some testing earlier this today...

There is a little airflow to the front. I would estimate that when I switch to floor only, I get about 20% of the airflow to the front floor vents, 0% to the rear floor vents, and 80% comes out the defrost.

Hey Flip. Would you happen to have this same info for the manual HVAC system. I would like to learn more about how it works. It seems like no matter what I try, I cannot get heat out of the front or rear floor vents

I spent some time today testing this. I have a base model, so I can't 100% replicate what you did because I can't select specific temperatures, but I can use the temperature nob to adjust through different temperature settings. This is what I found: - When set to defrost only, it only blows...