Search results

Same here on all counts! ordered 3/8, delivered 5/15, installed 5/20. Took me about 6 hours by myself, including a couple trips to the hardware store. I broke the first bolt that the instructions said to torque… so I had to take the board complete off, get the bolt out of the frame rail, get a...

Exhaust is hard. On top of having to base your purchase on video clips recorded with ??? microphones, and played back on ???? speakers, it’s also super subjective what sounds good! I’d probably look at Borla Touring (still high clearance version) if I did it again, for more of a Stock+ sound...

I have the Corsa because it was my favorite sound in videos, plus the available high clearance version. It does sound a lot deeper than I thought it would. I’m not 100% happy with it, but I’m not unhappy enough to swap it out. I get a little bit of drone with the hard top at 2300 RPM, so I need...

I’ve got a 1Up Super Duty Single with a one bike extension on it (so a two bike carrier). I ordered the Curt 45797 hitch extension (with 2” drop/rise), and I just I just picked up a locking hitch pin from Harbor freight for the extension to the receiver. I have 1Up’s lock for the rack to the...

Missed the 20% off sale by a day. Any chance at another discount code?

Jayson, did you ever get a tonneau cover made? I need some sort of cargo protection that wont break the bank. Btw, I still have your handheld GMRS radio from Tawas I need to get back to you!

Agreed! I used around 40 sq ft to do the rear of my 2 door. Just ordered another 36 sq ft for the doors and front. This time I’m trying the Siless pro, which is 50 mil of butyl plus foam (vs just 80 mil of butyl I did i the back).

I'm back and forth between a cheap MIC Amazon one and the nicer made in US JCR one. I've read that the Amazon ones maybe have trouble staying latched--they use some pretty small latches. The only knock I've heard on the JCR one is that rubber latches, while robust, take up a lot of room which...

5 or 6 weeks after the build date for me late last year.

Just got mine back. It took them 2 weeks after me dropping it off (with an appointment for this TSB, so I figured the labor would be allocated) just to get to it, but then it was done in a day. Fired it up when it was 43F this morning, and no noise! I also never got the paperwork to confirm the...

I started with the Course Motorsports mount but then found that only official apple wireless chargers charge iPhones at more than 7W. So I got a Apple MagSafe charger and Holder for the MagSafe to use with the course mount. I don’t feel like finding links, but I used a USBc extension cable to...

FYI I was quoted $1500 to add heating and cooling (on top of the Katskinz material and install price)

They need to hurry up and get to the Eibachs and Bilstein 6100s!

I have a different opinion on it than most. When I replaced 1 front speaker and faded back and forth from new to OE, the difference was massive. When I did that in the rear (OE 4” to aftermarket 6.5”), the difference was underwhelming for the ~$350 I was into it for pods and speakers. If I...

I just ordered your pump and 4 way tire kit/manifold for inflating. Would it be possible to have the manifold stop releasing air at a prescribed pressure using some various adapters to a Stauns-type deflator?

RollnJack still doesn't have any news on a 2door solution. But my initial assumption that TopLift Pro wouldn't work with a bimini might be wrong... The arms fold out (and over the top of the roll bar) after you wheel it up under the rearmost part of the top.

Anyone have a good solution for easy on/off with a Jtops bimini installed? Seems like it would rule out a (2 Door) TopLift Pro?

I think a few of us 2 door folks that ordered around March 8 just got that email in the last ~2 days. Just give it another week or two!

Since the outlet of the twin compressor is facing up, is there any room for a permanent line attached (like to a chuck mounted to the rear bumper, for instance)? Or wound the hood crash right into the connector?

This must be why my dealer has had my bronco two separate times for 2 total weeks and haven’t even done the repair yet: my service advisor told me they have exactly one tech who is qualified to work on manuals…? If that’s the case, I guess it’s worth waiting for them to be available instead of...