Search results

Not an option. Modular is an option.

Here is an example of what Nebraska requires. Right, center, left - none of that matters for the front plate. In all cases such license plates shall be securely fastened in an upright position to the motor vehicle or trailer so as to prevent such plates from swinging and at a minimum distance...

Kerlin Motors has put these on a Bronco. They list the wheel at 18 x 8" with a 55mm offset. 6-lug 135 mm bolt pattern.

This page should take you to the 4WP steps... https://www.4wheelparts.com/p/4-wheel-parts-factory-bronco-side-steps-4-door-61668w/_/R-4WPBR-61668W

Can you tell me how the Trail Aeroskin (Hood Protector by Lund Accessories) attaches to the hood? Also you are correct, factory rock rails must be removed before the 4WP step can be added. They do use the same mounting points.

I don't know about Base but these wheels became an option on the OBX awhile ago. Several threads specific to this wheel are out there. They use to be an option on the Ranger under the STX package. They should be 18 x 8".

siddious33, One last question. Since you got the X Dynamic "S" trim do you like the semi-powered seats or would you have ordered the "SE" with full power memory seats? I do see that the semi-power seats does have a power squab reclining feature but everything else is manual. Any complaints...

Again, thanks for the pictures and the details on your purchase. Can you tell me the distance between the ground and the step in height? I understand there is also a setting for automatic access height which lowers the vehicle when the door is open.

I just went to the build and price web page. The four-door Badlands leather trim with power seats shows available. It could be a commodity constraint but who knows.

Thank you for sharing. I'm sure you will enjoy your new ride.

Look at the Bronco accessory wheel. Most on here don't like it. It's 18x8 with a 55mm offset. One dealer has put a 33" tire package together with this wheel.

You are correct.

If I remember correctly on the Big Bend you can add tube steps while configuring the vehicle. I believe when you add the tube steps as Ford calls them it also adds the MID package.

Yes, its been done. The rock rails will need to be removed.

Please post some pictures when you get it. Front, side and rear shots would be nice and appreciated. Thanks, Jim

Badlands with KO2's is C load. I would not go with anything higher.

Kerlin Motors in Indiana has a package where they put the Bronco accessory wheels on an OBX (18x8") and mounted General Grabber 275/70R18's without removing the crash bars and no lift. No modifications. No issues.

How long before your get your 90? This is one of 2 backup vehicles if I don't get an early 2022 Bronco. I'm considering spending a little more to get the retractable fabric roof.

I should know the answer to my question but obviously I don't. Not a tool guy! What tool, what size do I need to remove the modular bumper Bronco bolts? And does the tool come with the vehicle or do I need to go out and buy it? Thanks!