- First Name
- Fraser
- Joined
- Mar 20, 2023
- Threads
- 7
- Messages
- 259
- Reaction score
- 369
- Location
- Orange County, California
- Vehicle(s)
- BMW e92 328
- Your Bronco Model
- Wildtrak
Huntington beach!
Sponsored
Sponsored
- Thread starter
- #32
I was looking at the Rockford Fosgate slim T1S2-10 sub woofer.Due to manufacturers using slightly different specs for their own sub, we design the box specifically for that sub. We can design it around almost any shallow-depth 10" subwoofer. We are a Kicker retailer, so Kicker CompRT 10" will be a given. We also do a lot of boxes for the JL 10TW3 sub, which this first box is going to be. So that is always on the list too, shown below.
We will produce the box to mount the Power-9 F25 directly to the box, just like the B&O would have been. These boxes will be purchased directly through our shop. We are not a Zen retailer.
https://additivecaraudio.com/
It's a little thinner as well.
Would this present any problem with the Enclosure?
They also provide the STEP CAD file of the Speaker to help with sizing in design.
At the bottom of the Web Page / Specification Menu is the STEP File: 10MB file.
https://rockfordfosgate.com/products/details/t1s2-10/
- First Name
- Robert
- Joined
- Nov 30, 2021
- Threads
- 0
- Messages
- 54
- Reaction score
- 45
- Location
- Orange County, CA
- Vehicle(s)
- 2013 Yamaha R6, 2015 Honda Civic
- Your Bronco Model
- Badlands
So close to me. Where and how can i visit to listen to the shop Bronco? Upgrading the B&O system has been on the wishlist but spending that kind of cash without listening to it first gives me buyers anxiety.
- First Name
- Fraser
- Joined
- Mar 20, 2023
- Threads
- 7
- Messages
- 259
- Reaction score
- 369
- Location
- Orange County, California
- Vehicle(s)
- BMW e92 328
- Your Bronco Model
- Wildtrak
That should work fine! I will put the STEP into my CAD on Monday, and see how it looks.
Sponsored
- Thread starter
- #36
Question, is this enclosure sealed or ported?Due to manufacturers using slightly different specs for their own sub, we design the box specifically for that sub. We can design it around almost any shallow-depth 10" subwoofer. We are a Kicker retailer, so Kicker CompRT 10" will be a given. We also do a lot of boxes for the JL 10TW3 sub, which this first box is going to be. So that is always on the list too, shown below.
We will produce the box to mount the Power-9 F25 directly to the box, just like the B&O would have been. These boxes will be purchased directly through our shop. We are not a Zen retailer.
https://additivecaraudio.com/
I haven’t paid attention to either OEM or AdditiveCarAudio until I was coming across subs that have a sealed & ported model.
All of our enclosures are a sealed design. The OEM is ported.
Also, the Rockford T1S2-10 fits great in our enclosure.
Last edited:
- Thread starter
- #38
Great to hear… I was hoping it was sealed. The minimal I know about audio and subs, I read more that sealed provides a better Sub enclosure and has audio benefits too.
My naivety shows again, so a Sub made for Sealed Enclosure, does it have it’s own porting and a sub made for Ported Enclosure doesn’t?
** Edit ** reading a bit more, sounds like the difference in same speaker with ported or sealed models is primarily the spiders tension. The Ported Speaker has a higher tension spider(s); due to ported enclosure allowing speaker to move move freely. The sealed speaker has lower tension spider(s) due to the sealed enclosure assists in the cushioning or spring of the speaker’s movement. * end edit*
Nice to hear the Rockford T1S2 fits!
Are you getting close to being able to provide the enclosure for the power-9?
Sponsored
Last edited:
