2024 Badlands Build Journey

[TheMissingPersonFrom1969]

Looks great, can you do me a favor. Can you measure from middle of your tire to the fender? Curious what it is in inches for clearance for the 37s. I’ve got 9 inches now in the front and 8.5 in the back for my 35s from tire to inner fender.

View attachment 790840

Yeah I can do that but it looks like in your picture you measured from the top of the tire to the fender, to clarify, you want me to measure from the middle (logo) or top of tire?

Sponsored

 

[telenerd]

Yeah I can do that but it looks like in your picture you measured from the top of the tire to the fender, to clarify, you want me to measure from the middle (logo) or top of tire?

Oops my bad, like the photo. Top of the tire to fender.

 

[TheMissingPersonFrom1969]

Oops my bad, like the photo. Top of the tire to fender.

sorry for the wait, got trapped in a conversation with my neighbor. These are both driver and passenger

 

[telenerd]

Thanks! Is the rear tires the same too?

 

[TheMissingPersonFrom1969]

Thanks! Is the rear tires the same too?

yeah, looks about the same

 

[TheMissingPersonFrom1969]

Meant to post these a couple of days ago, but I added one-inch wheel spacers since the tires were rubbing the upper control arms at full lock. Then, I added the rock jock tracbar relocation bracket alongside the rough country adjust

able trac bar, makes the bronco feel a lot more planted to the ground. Next up is the winch and winch mount. Thinking of rough country for that.

 

[TheMissingPersonFrom1969]

Installed the rough country high winch mount along with the rough country camera relocation kit. I haven't wired it up yet, still waiting on a 2ft positive wire to hook up to an isolator

 

[Panda Motorworks]

Figured I'll get it on the hype of showcasing what I've done with my bronco so far. I've already completed a few things already, so hopefully this thread won't last months. First thing I did was buy takeoff everglades wheels for a pretty good deal on Facebook

for around $500 awhile ago

Have fun on your build journey! If you are looking for any parts or Bronco upgrades, Panda Motorworks has a lot to offer!

Take a look;
https://www.pandamotorworks.com/search?options[prefix]=last&q=bronco&filter.p.product_type=

 

[cameherefromjeep]

do you have a link for this?

And just now I finished installing an Amazon special raptor look alike tailgate reinforcement kit alongside another Amazon special third brake light relocator

 

[TheMissingPersonFrom1969]

do you have a link for this?

for both the reinforcement and brake light relocator?

 

[cameherefromjeep]

for both the reinforcement and brake light relocator?

I didn’t end up needing a brake light replicator but I could use the reinforcement

 

[TheMissingPersonFrom1969]

I didn’t end up needing a brake light replicator but I could use the reinforcement

https://www.amazon.com/dp/B0FZJM7FDM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Here you go. So far I'm liking the reinforcement. I'm pretty sure it's the same one mabett, bucket up offroad and other drop shippers are using.

 

[TheMissingPersonFrom1969]

Found a good deal on take off sas fender flares

 

[TheMissingPersonFrom1969]

Also installed gearshade limb risers. Power coated the brackets.

 

[TheMissingPersonFrom1969]

Finally got around to installing the frame horn reinforcement kit and wiring the winch to the bronco

Sponsored