Looking Ahead to 2026 — What’s the ONE Bronco Product You Wish Existed?

[jayMD]

I'd like to see a bull bar for the capable bumper that has improvements over what's currently on the market. Specifically, a bull bar that is taller (but lower than the grille letters), and possibly juts out at a steeper angle (perhaps between 65 and 75 degrees). What I've seen available for the capable bumper offers a place to mount lights, but no grille/radiator protection. No-drill application might be nice.

Sponsored

 

[jsoa]

e-brake relocation kit so it's next to window buttons

 

[zuke]

A Windstopper and tonneau setup for two door Broncos, similar to these for Jeeps;

https://www.mastertop.com/products/accessories/

 

[CalvinT]

Love this suggestion — it is exactly the kind of quality-of-life improvement that often gets overlooked.

I could build something that did what I want without dimming or phone access by using an inexpensive controller from Amazon ($20) and some rock lights. Hella had scene lights that could do white and amber for $80 each, but they're not available. I would make my own setup if I could find the right lights and go without phone control.

Digital Dynamics sells a controller and multi color rock lights that would do what I want. But I don't need to put on a light show, plus I'd have to spend around $460 and takes too many wires. They made it too customizable. I don't need full RGB.

 

[KreeHBronco]

I would like more modular products that can be added to over time. For example, a cargo area security and storage solution that has separate upper shelf, molle sides, slide out bottom extension, tailgate fold out table, and behind the seat molle security wall. Each could be bought/installed one at a time and they all fit together. Maybe add provisions for attaching a 12V frig and DC power bank. I would also like to see better, lower rock rail side steps/rails that drop by 3-6 inches for short people. I would also like to see a hidden front winch mount that included a drop-down pivot hinge or door so you could access the winch spool level easily, but it could be raised and locked into position when being used.

 

[Neps]

Roof rack that can be used covering a full 4 door hard top or as a rear section only.

My idea would be to manufacture a rear roof rack that could be used alone, or a front section added for full coverage. Might be interesting to include a hinge (pivot point) for the front section so the roof sections can be easily removed.

 

[Neps]

How about a heavy duty steering rack that can be installed by an average mechanically inclined person, or even a dealership...

 

[Neps]

Door inserts and soft doors similar to what was available on Super Scouts.

 

[Fastmc25]

To eliminate the plastic bumpers and skid plate. Give all models the modular bumper or the Capable bumper.. We don’t need 3 different types of bumpers.

Let the Bronco Sports have the plastic.

Steel or aluminum skid plates also.

 

[JBlanco]

An affordable and reliable 8" to 12" infotainment conversion kit and digital dash kit.

 

[JBlanco]

A transmission skidplate for the 2.7L similar to this one but without the yellow badging:

 

[JBlanco]

An Adaptive Cruise Control retrofit kit.

 

[lindertw]

removable side glass on the hard top (similar to the Heritage model)

 

[Mark M]

Hey Bronco6G,

This is Ryan from Mabett.

Over time, we’ve had a lot of great conversations with members here, and many of our product ideas have been shaped by feedback from this community. As we start planning ahead, we wanted to open things up and ask a simple but important question.

Looking toward 2026 — if you could choose ONE product you wish existed for your Bronco, what would it be?

This isn’t about announcing a new product or pushing sales. We’re genuinely trying to understand:

• What problems you still haven’t found a solid solution for

• What you’ve had to DIY because nothing on the market quite works

• What you feel aftermarket (or even OEM) still gets wrong

It could be interior or exterior, daily-driven or off-road focused, simple or complex — all ideas are welcome.

To help get thoughts flowing (just examples, not hints):

• Storage or protection solutions that actually hold up to real-world use

• Modular upgrades that don’t require permanent modification

• Products designed around how Broncos are actually used

We can’t promise to build everything mentioned here, but we do take input from this community seriously when planning future development.

For ideas that move forward into development, the members behind those suggestions will be invited to participate in early-stage prototype or sample testing, so they can provide real-world feedback before a product is finalized.

If there’s one thing you’ve always thought: “Why doesn’t anyone make this yet?” We’d really like to hear it.

Thanks for taking the time to share your thoughts.

Join our community to stay updated with the latest product releases, exclusive promotion discounts and abundant opportunities for free product trials.

Electric, automatic folding mirrors.

 

[Mean Green]

2 doors are neglected… a “B“ & “C” bow brace to stiffen the body. Something set up like the Ford Performance version, that will fit the 2 door.

Sponsored