Sponsored
Umichigan1's latest activity
-
Umichigan1 replied to the thread Hood sticker replacement recommendations.My side stripes are Underground Graphics. They've held up well with no apparent fading for a few years of Michigan winters. -
-
Umichigan1 reacted to BA OffRoad's post in the thread [FAQ] Everything You Need to Know About the Broaddict Overhead MOLLE Panel System — Fitment, Installation, Wiring & Troubleshooting with
Like.
A 2-door model would require separate measurements, roof-clearance checks, mounting development, and load testing. We’ve already passed... -
Umichigan1 replied to the thread [FAQ] Everything You Need to Know About the Broaddict Overhead MOLLE Panel System — Fitment, Installation, Wiring & Troubleshooting.Is there a plan for 2-door?
-
Umichigan1 reacted to Area51BS's post in the thread Smell good in your Bronco - BRONCO BRICC with Like.
Reese’s cup was a hit.
-
Umichigan1 reacted to Harry The Heritage's post in the thread If you could get rid of one ownership headache, what would it be? with Like.
My only gripe I have with the bronco is the interior rattles, specifically the ones in the rear cargo panels. Anyone here have done a...
-
Umichigan1 reacted to KreeHBronco's post in the thread If you could get rid of one ownership headache, what would it be? with Like.
Better gas mileage. I would like to get 25 to 30mpg vs 18 to 20mpg. I know, it's a Bronco (it's not supposed to get good mileage, shaped...
-
Umichigan1 reacted to The Green Flash's post in the thread If you could get rid of one ownership headache, what would it be? with Like.
Honestly... Compared to other cars we have, not a gripe from me. I've got a startup sequence down that turns off ASS, collision...
-
Umichigan1 reacted to exoshield's post in the thread If you could get rid of one ownership headache, what would it be? with Like.
3rd?! That's brutal. Hopefully 3rd times the charm.
-
Umichigan1 reacted to exoshield's post in the thread If you could get rid of one ownership headache, what would it be? with Like.
Yuuuuuuup. Where did they start for you? The usual corners and edges?
-
Umichigan1 replied to the thread Smell good in your Bronco - BRONCO BRICC.This reminds me of a George Carlin quote, "if you stick two things together that have never been stuck before, some dumb schmuck will...
-
Umichigan1 replied to the thread What Was the First Trip That Made You Glad You Bought a Bronco?.I've never had the opportunity to be a great traveler like some others (trips to Moab, Johnson Valley, etc.) and so all my travels are...
-
Umichigan1 replied to the thread New member to the cracked MIC club.Life long Ford driver (3rd generation Ford family). Who's really kidding whom? All cars and trucks suck at some point.
-
Umichigan1 reacted to Superchips_Mktg's post in the thread Trying to program Forscan for switch to 35s- Help Please! with Like.
We took many of the most popular things people do to their Bronco with that software, and packaged it up in an easy to use iOS/Android...
-
Umichigan1 replied to the thread $259.99 Tube Fender Flare Delete - Arrive Soon!.I totally agree with this.
-
Umichigan1 replied to the thread $259.99 Tube Fender Flare Delete - Arrive Soon!.Nothing for 2-door?
-
Umichigan1 replied to the thread New member to the cracked MIC club.I just had my top replaced last month (had it authorized just before my warranty expiration). The new top now has cracks (now out of...
-
Umichigan1 replied to the thread Tire Pressure Question.A little OCD for me, also. I bought an independent sensor package that attaches sensors to the valve stems. It tells me pressure and...
-
Umichigan1 replied to the thread Trying to program Forscan for switch to 35s- Help Please!.Did you write your own version of Forscan?
-
Umichigan1 replied to the thread Tire Pressure Question.Here's my weird contribution. I do a 5 tire rotation around every 5K, yet my right front always seems to run a pound or so lower every...
-
Umichigan1 replied to the thread What's the most "worth it" upgrade you've made to your Bronco?.Tires
-
Umichigan1 replied to the thread Trying to program Forscan for switch to 35s- Help Please!.I had to tweak my numbers when I moved to 35s. I measured the circumference manually with the tires under load. Then I put the number in...
-
Umichigan1 replied to the thread Mounting a Thule/Yakima Cargo box on a half rack?.To be honest, this model of box is not likely sold anymore. It's at least 20 years old. It has had a long life on a few of my vehicles.
-
I am going to add the led taillights to my 2024 black diamond 2 door and want them to work like from the factory. I know I need to run...
-
Umichigan1 replied to the thread PSA Cheap Effective Mod: Tailgate Pin Reinforcement.Some engineer at Ford is sitting back and having a chuckle at our expense. I don't mind the high level engineering. I just wish they...
-
Umichigan1 reacted to Mabett's post in the thread What Bronco Mods Don’t Play Well Together? with Like.
If your current handles use the same mounting bolts and there’s enough space, they should work together. You can also install only the...
-
Umichigan1 reacted to SoDak1623's post in the thread We fixed the Ford Bronco's biggest problem... đźš™ with Like.
There's a lot of weirdly aggressive 4 door people in this thread. Almost as bad as the subset of Jeepers who can't just enjoy their rigs...
-
Umichigan1 reacted to nwGTS's post in the thread We fixed the Ford Bronco's biggest problem... đźš™ with Like.
Not sure why all the hate. Love the innovation. Might pick up the one that keeps the rear seats for those of us two door owners who...
-
Umichigan1 replied to the thread What Bronco Mods Don’t Play Well Together?.Hello. Here is my conundrum. A few years ago I installed some sturdy, aluminum handles to help with ingress/egress into my Bronco. Much...
-
-
Umichigan1 reacted to Jakob1972's post in the thread I Fixed My MIC Top Cracking Issue - Hopefully with Like.
Some time ago I was putting my top back on the Bronco late in the evening when the sun was just right and I noticed small cracks in the...
-
Umichigan1 reacted to off_road_ranger's post in the thread maintenance tips for any new Bronco owner with Like.
After owning a Bronco for a few years, I've compiled a list of maintenance tips from experience and googling issues that I've had. Any...
-
Umichigan1 replied to the thread Looking for rubber plugs.You may not want to plug those holes. Just gives water a place to collect, settle and cause problems.
-
Do you mind if I ask why?
-
Umichigan1 replied to the thread New Falken AT4W 35/11.5 17 tires.Very nice. I envy the lift. Maybe someday....
-
Umichigan1 replied to the thread Best and cheapest side step I was able to find that attaches to factory rock rails..I've had these for the last 3 years and they are amazing (or as amazing as bolt on side steps can be). Not a bit of corrosion and they...
-
-
Umichigan1 replied to the thread Round 2 of engine emblems..I like this idea much better than other ones I've heard in the thread since far. -
Umichigan1 replied to the thread Annoying rubbing noise from rear of the Bronco... Solution: Aero Cosmetics Rubber Care.I wonder if this might help with the awkward sealing of the side windows?
-
Umichigan1 replied to the thread Dinged up bash plates -- how to prevent rust.In Michigan it's a losing battle (Winter, salt, bad roads in general, etc.). For us it's a case of learning to embrace imperfections.
-
If u know someone with 3d printer. Could make something like this.
-
Umichigan1 reacted to zathus's post in the thread No covers for my cheap China light bar? No problem! with Like.
So I'm not one of those people that dumps a bunch of money in the lights. Like I'll put them in but I put in the cheap stuff and put...
-
-
Umichigan1 replied to the thread Gas mileage question.I used to get 18mpg (when new - 2022 2-door). Since then I switched to 35" tires ( on std. wheels - if that matters). I also added a...
-
Umichigan1 replied to the thread Steering Grabbing at Times - Warranty Repair?.I thought maybe it was their first vehicle with the feature. It can be a bit disconcerting until one gets used to it.
-
Umichigan1 replied to the thread Steering Grabbing at Times - Warranty Repair?.I haven't read this whole thread so please excuse me if this has already been proposed. Is it your Lane Assist Steering that you're...
-
Umichigan1 reacted to Ducati1098's post in the thread Recall 26S32: 2021-2022 Model Year Broncos MIC Hard Top Roof Panel Delamination [May 15, 2026] with Like.
NHTSA information: https://static.nhtsa.gov/odi/rcl/2026/RCLRPT-26V299-2713.pdf?_cl=pYWBPCB9OjYYMbDKnEdRJDe1 Total number of...
-
Umichigan1 replied to the thread Bronco interior finishing touch artifact đź’ˇ.Ya' talked me into it. Just bought a set.
-
Umichigan1 replied to the thread Bronco interior finishing touch artifact đź’ˇ.I like the idea of a blue ambient light. I think I may give these a try.
-
Umichigan1 replied to the thread Quiet Axleback suggestions.I've been very happy with my MRT setup. Zero drone. Enough volume to hear good feedback from the motor when on the trail. The tone of...
-
As a current user, I concur.
-
You're completely wrong as far as MRT goes.
-
The MRT with the midship muffler...it's perfect...ELITE series G.O.A.T MRT Exhaust. You'll love it.
