Sponsored
PowerBronco's latest activity
-
PowerBronco replied to the thread Coolant use with ecoboosts.I had slow coolant loss over several thousand miles that kept happening - going from the full mark to the min mark. I filled it up... -
PowerBronco replied to the thread My fifth Bronco.Paying sales tax where I live once was more than enough. I about fell out of my chair when I thought about paying that 5 times over...
-
PowerBronco reacted to Ducati1098's post in the thread 2.7 Engine Upgrades - supercharger / bigger turbos? with
Like.
I made 396/470 with stage 3 CRP turbos on 93 Similar compressor size, but still a stock turbine size unlike the Garrett turbos. Stock... -
I had one of the FP covers that rusted out. Contacted them and they sent another right away. Plus I got to keep the old one. So if for...
-
PowerBronco replied to the thread Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts..Fusion360 also has a hobbyist license that is free, but the learning curve is STEEP.
-
PowerBronco replied to the thread Raise Rear View Mirror - SOLUTION: Mirror Riser.Ordered and installed today. Thanks for sharing this!! The low rear view mirror was always a complaint of mine, and I am only 5'10"...
-
Bore and stroke are both different
-
PowerBronco replied to the thread Topless cargo security — what are you actually doing?.I have the ez 4x4 trunk. It's been awesome for securing my stuff with the top off, and folds down when I don't need it. I highly...
-
PowerBronco reacted to GI_Jo_Nathan's post in the thread My bait and switch oil change experience. with Like.
I had no idea synthetic oil changes were costing that much. I do my own with Mobil1 for about $40 to $45 depending on if it's on sale at...
-
PowerBronco replied to the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected.I created this today to slide over the sharp edge.
-
-
PowerBronco reacted to Ducati1098's post in the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected with Like.
The information is expected to release on Friday.
-
PowerBronco reacted to solracarevir's post in the thread Some offroading fun in Puerto Rico with Like.
Took my Bronco with a few other rigs (mainly Jeeps, i was the only Bronco) to a Trail in carite, Puerto Rico. Carite is known for being... -
PowerBronco reacted to Ducati1098's post in the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected with Haha.
The ballpark is somewhere in the engine compartment for now
-
PowerBronco reacted to Ducati1098's post in the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected with Like.
We will find out in a week or so hopefully
-
PowerBronco replied to the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected.Any indication on where this affected wiring harness chafing is? I'd like to go put some eyeballs on it.
-
PowerBronco reacted to JustinNck1's post in the thread What did you do TO / WITH your Bronco today? 👨🏻🔧🧰🚿🛠 with Like.
I used the model off makerworld/bambu lab and had to widen it to 120% on the width. I printed it the way it was published and the clip...
-
PowerBronco replied to the thread What did you do TO / WITH your Bronco today? 👨🏻🔧🧰🚿🛠.Are you able to share that radio mount? I have the same one (and a 3d printer) and would like to mount it like that.
-
I wheel in Colorado hopefully at least once a year. I was unaware of proper permitting until this year. It is SO important to pay your...
-
PowerBronco reacted to Ducati1098's post in the thread 2.7 oil pump belt failed at 254,577 mi (Reddit post) with Like.
254K miles proves it's not the big issue some people think it is lol There are so many Ford engines with these and none of them ever...
-
PowerBronco replied to the thread I Fixed My MIC Top Cracking Issue - Hopefully.Yes, the issue is only with the MIC top. I have seen 0 reports of any of the painted tops with cracking or delamination issues.
-
For starters, I do all of my own maintenance on my '23 Badlands, as well as my previous '21 Badlands. The last time I did an oil...
-
PowerBronco reacted to Ducati1098's post in the thread Code PO443 EVAP emissions system Purge Control Valve Circuit with Like.
Did you clear the code after plugging it back in?
-
PowerBronco reacted to userdude's post in the thread Severe duty steering rack 7 weeks at dealer with Haha.
I used to work with a guy who had a pickup in the 70's or 80's he kept having to bring back to the dealership but the problems...
-
PowerBronco reacted to GL4DY5's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
Do any of us ever want to?
-
PowerBronco reacted to dejones64's post in the thread What did you do TO / WITH your Bronco today? 👨🏻🔧🧰🚿🛠 with Like.
Ticked over 100k earlier this week. Took ownership Aug of 2022. A little over 25k a year. Kicking off the next 100k this Sat with a...
-
PowerBronco reacted to Valhalla's post in the thread Ford Performance Severe Duty Steering Rack Install + Programming Experience (Bay Area) with Like.
Wanted to post one non horror story. Procal worked fine rack install was fairly easy.
-
PowerBronco reacted to shaw's post in the thread Bronco set first half and second quarter sales record and outsold Jeep Wrangler in Q2 2026 with Like.
Those are impressive numbers, especially Bronco setting another sales record and outselling the Wrangler in Q2. It's good to see Ford...
-
PowerBronco reacted to Ducati1098's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
No. They just don't have problems like everyone assumes they will.
-
PowerBronco replied to the thread Topless Trunk Security. EZTrunk, what else?.I really like having the Ez4x4 trunk to secure stuff when the top is off. Also as a bonus, it's nice to be able to secure things with...
-
PowerBronco reacted to Ducati1098's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
Factory oil pump belt? If so, this is going to prove a lot of haters wrong 😂
-
PowerBronco replied to the thread New Stroppe Owner - Joining the FORD world.I've owned it since almost new. I bought it used in 2010. It's got almost 200k miles on it now. The FJ and Bronco are both awesome...
-
PowerBronco replied to the thread New Stroppe Owner - Joining the FORD world.I also have an 07 FJ and a Bronco. I feel like there's probably more than a handful of us on here that are rocking both!
-
-
PowerBronco replied to the thread The Granger Extended warranty..I called them a few weeks ago about this. Regardless of which path you choose on their site - the Granger Ford Protect URL, or the...
-
PowerBronco replied to the thread Auto Stop/Start not working (Resolved).I've noticed if its above around 83 outside temp it disables auto start stop.
-
PowerBronco replied to the thread ESP PremiumCare or Not?.There are different rules based on whether or not you are still under the 3/36 or not. I got mine right before the 3/36 was up, and it...
-
PowerBronco replied to the thread ESP PremiumCare or Not?.5 years ESP I thought is from the in service date of the vehicle? That gets you what, 1 more year for the 22MY? That isn't worth it IMO...
-
PowerBronco reacted to Ducati1098's post in the thread E50 Tune Unlocks Nearly 100 Horsepower in the 2.3L Bronco! Dyno Results Inside with Like.
lol thanks, that at least answers my question 👌🏻
-
PowerBronco replied to the thread Auto Stop/Start not working (Resolved).The cluster display on your 24 will tell you why it's not turning on the auto start stop. Navigate to Trip/Fuel and then select Auto...
-
-
PowerBronco reacted to EvilJim1971's post in the thread Anyone else concerned owning this car out of warranty ? with Like.
Nah I'm good.
-
PowerBronco replied to the thread SSM 53981: 2021-2024 Bronco - Window Rattle From The Front Doors Over Bumps.Agreed - like most of the folks here, I had to complete the installation of the window molding after I got it back because it wasn't...
-
PowerBronco reacted to Ducati1098's post in the thread SSM 53981: 2021-2024 Bronco - Window Rattle From The Front Doors Over Bumps with Like.
There is. But like anything else, some aren't very good at their jobs or don't care to be good 🤷♂️
-
PowerBronco replied to the thread SSM 53981: 2021-2024 Bronco - Window Rattle From The Front Doors Over Bumps.I printed out the SSM and handed it to the service advisor when I dropped mine off so there wasn't any confusion as to what I was asking...
-
PowerBronco replied to the thread Anyone else concerned owning this car out of warranty ?.Maybe I will live to regret this, but I think low key the Bronco is going to be one of the most reliable vehicles that Ford made during...
-
PowerBronco replied to the thread One of the Largest Manufacturers Gone Bankrupt!!!.I'm disappointed because the Fram Synthetic Endurance FE11955 is one of the best filters for the money you can buy for the 2.7L ecoboost.
-
PowerBronco replied to the thread Hard Top Cracking - Warranty / Recall of all MY’s.Recall 26S32: 2021-2022 Model Year Broncos MIC Hard Top Roof Panel Delamination [May 15, 2026] | Page 3 | Bronco6G - 2021+ Ford Bronco &...
-
-
PowerBronco reacted to SwampCactus's post in the thread Baja S2's in Bumper with aftermarket bracket with Like.
I added a set of Baja Designs S2's in the middle section of the bumper. I was able to use the existing bolts that are there and mount a...
-
PowerBronco replied to the thread Low coolant again.I had a similar issue and I finally discovered a pinhole leak in the radiator. I took pictures and took it to the dealership. They...
-
PowerBronco replied to the thread Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts..I've never printed with POM, but my current printers are capable based on the required temps, ECT.
-
PowerBronco replied to the thread Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts..Probably one of these types of filament - nylon, polycarbonate, nylon blend or polycarbonate blend. I'll have to see what works best.
-
PowerBronco replied to the thread Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts..Created the steering rack bushings for the Hoss 2.0 rack. I am going to be working on these to see if I can design them in a way to be...
-
