Sponsored
murrman's latest activity
-
murrman replied to the thread Tune X- Lethal Performance.Pardon my ignorance, but I don't really know much about these kinds of products and how they work. From a functional standpoint, is... -
Ill get you some measurements in a couple weeks! They will be slightly rough but good enough that you can have it made without the...
-
murrman replied to the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)?.I've thought about something like the PeakDo LinkPower, but I don't think it would work with my American Adventure Lab mount. Not sure I...
-
murrman posted the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)? in Electronics, Electrical, Software, AUX, Audio, Nav, SYNC, FordPass, Trail App, Comms, Cameras.Curious if anyone has experience using the factory pre-run wires (the non-powered ones that run between various locations in the Bronco)...
-
murrman replied to the thread UNVEILING: The All-New MRT Elite Series | Bronco Exhaust, All Grown Up.I'm assuming it's not possible, but do you offer any sort of retroactive price matching if I purchased a week ago but missed the MBC10...
-
murrman replied to the thread UNVEILING: The All-New MRT Elite Series | Bronco Exhaust, All Grown Up.I bit the bullet and bought one. The difference in sound is huge! I can’t speak for everyone in saying it’s worth the $600 if you...
-
murrman replied to the thread Tailgate Molle panel (not table) recommendation?.Thanks!
-
murrman reacted to Easy-v's post in the thread Tailgate Molle panel (not table) recommendation? with
Like.
seems to be right on Hard to do this one hand on phone other on tape measure -
murrman replied to the thread Tailgate Molle panel (not table) recommendation?.It depends on the panel. I know the Putco/Ford one and M2M ones don't require drilling, but the ADD and DV8 ones do.
-
murrman replied to the thread Tailgate Molle panel (not table) recommendation?.I seriously considered this one because I have quite a few M2M products. The only thing I don't like is how it leaves the wiring along...
-
murrman replied to the thread Tailgate Molle panel (not table) recommendation?.I do like that one. Would you be willing to do me a favor the next time you're able and measure the distance between the small holes? I...
-
murrman replied to the thread Tailgate Molle panel (not table) recommendation?.Thanks! Do you know if the Ford one is the same as the Putco one? They appear to be identical, but I can't find any confirmation.
-
murrman posted the thread Tailgate Molle panel (not table) recommendation? in Interior Modifications - Sponsored by 3Wliners Floor Mats.I'm looking at replacing my current tailgate table with a Molle panel. I don't really use the table function, and I'd rather save some...
-
murrman replied to the thread Armadillo Designs 2 door hard top review.Are there any photos/videos showing what it looks like from the inside when the roof panels are removed? I'm curious how closely it...
-
murrman replied to the thread 2.3L Performance Tune: what do I need to know before purchasing?.I've made a few changes using Forscan. Will getting the tune installed affect those changes at all?
-
I use a transmission jack and the EZ4x4 guides. I lift the door up with the jack and slide it back down on the hinges...
-
murrman replied to the thread [UPDATE] Broaddict Slide-Out Tailgate Drawer for Bronco 2-Door!.If you need any additional testers, I'd gladly volunteer as tribute.
-
murrman reacted to That Bronco Guy's post in the thread 2.3L Performance Tune: what do I need to know before purchasing? with Like.
It’s a nice upgrade and should have come stock. The shift points are the largest “felt” advantage and the ability to adjust tires is...
-
murrman posted the thread 2.3L Performance Tune: what do I need to know before purchasing? in 2.3L EcoBoost Engine / Exhaust / Mods.I'm seriously considering getting the performance tune for my 2024 2.3L. Before I do, I want to make sure I fully understand what I'd be...
-
murrman replied to the thread Starlink Mini Setup / Power?.Do you use both of the adapters you linked, or were those just two different options?
-
murrman replied to the thread Starlink Mini Setup / Power?.Can you help me understand how you have those two wired up?
-
murrman reacted to stevenstommyboy1's post in the thread Tips/Advice for Silver Lake Dunes with Like.
We were there 3 weeks ago and had a great time. Run 15 pounds in your tires and you will be fine. The top of test hill was sharp from...
-
murrman reacted to Z because X was taken's post in the thread Sand vs Baja mode for Silver Lake Dunes with Like.
4Low is not necessary, you are gonna need some speed to get up them big sandy hills, carry your momentum until you just get to the top...
-
murrman replied to the thread Tips/Advice for Silver Lake Dunes.Thanks, we are pretty excited too! Do you have beadlocks on your wheels? I'm slightly nervous about going down to 13 psi without...
-
Excited for your trip out there ! Personally. I ran 14 psi on the front and 10 on the rears last year. 12 would be fine I bet. Looks...
-
murrman replied to the thread Sand vs Baja mode for Silver Lake Dunes.Thanks. Did you keep it in 4-low the whole time? I've only ever used 4-high, so am not sure what the exact limitations are when in 4-low.
-
Air down to 10 and run in 4-low. We were there a few years ago, going up the big dune is a real rush.
-
Sand mode is just fine and what I usually stick with. Airing down to 10-13 is more critical imo.
-
murrman reacted to DarthLincoln's post in the thread Sand vs Baja mode for Silver Lake Dunes with Like.
Last time I went to Silver Lake Sand Dunes was like 20 years ago, but yeah I remember it as all deep dry sand (dry for Michigan). Sand...
-
My wife and I are taking a trip to Silver Lake Dunes next week. We're not planning on doing anything crazy, but do plan on driving...
-
murrman posted the thread Sand vs Baja mode for Silver Lake Dunes in Off-Roading, Overlanding, Camping Technique, Planning, Trails.My wife and I are planning a trip to Silver Lake Dunes next week, and I have a question for anyone who's been there (or any place...
-
murrman replied to the thread Introducing noteworthy brand—swing gate storage that stands out.If the price of the panel plus a couple large bags was around $200, I'd buy it for sure. I like the idea of being able to store my...
-
murrman replied to the thread Introducing noteworthy brand—swing gate storage that stands out.Looks interesting, and I've been considering getting something lighter than the tailgate table I currently have, but the price seems...
-
murrman replied to the thread UNVEILING: The All-New MRT Elite Series | Bronco Exhaust, All Grown Up.I would still love to hear from anyone who can compare the sound of the Elite to the sound of the Steeda on the 2.3l. Trying to decide...
-
murrman posted the thread Anyone have the Westin Hidden Winch Mount? in Off-Roading, Overlanding, Camping GEAR -- Winches, Onboard Air, RTT, Tents, Coolers, Recovery, Snorkels Etc..Has anyone installed the Westin hidden winch mount on their Bronco? I'm running the Capable bumper with IAG's FMS bull bar and light...
-
murrman reacted to MRTperformance's post in the thread UNVEILING: The All-New MRT Elite Series | Bronco Exhaust, All Grown Up with Like.
Volume doesn't really change but the direction of the sound changes the experience. The Turn Down in my experience has been a little...
-
murrman replied to the thread UNVEILING: The All-New MRT Elite Series | Bronco Exhaust, All Grown Up.General question for anyone, especially @MRTperformance, what kind of sound difference is there between the turndown tip and the regular...
-
murrman replied to the thread UNVEILING: The All-New MRT Elite Series | Bronco Exhaust, All Grown Up.Did you end up getting the Elite? I currently have the Steeda exhaust, but I'm considering replacing with the Elite. I'm interested in...