Sponsored
Canyon Coolers's latest activity
-
Canyon Coolers replied to the thread B-Pillar Braces recommendations?.I'm only aware of the Ford Performance one. Havent seen an aftermarket version. -
Canyon Coolers reacted to Gluestick's post in the thread B-Pillar Braces recommendations? with
Like.
I have had similar experiences with monumental improvements from the Goatfab b-brace. Rode in a friend’s Bronco without it the other day... -
Canyon Coolers replied to the thread E load vs C load tires - what's your pick?.I thought my Kenda RT's were C but after looking them up they are D . Super happy with them. I had the MT2 before that maybe they were...
-
Canyon Coolers reacted to Broncolander's post in the thread E load vs C load tires - what's your pick? with Like.
I ran C D and E over the years. E is excellent for rock crawling because the side walls are thicker than yo mamma. Ran those on my jeep...
-
Canyon Coolers reacted to CarreraX's post in the thread DIY: Bronco Raptor Paddle Shifters on Standard Steering Wheel with Like.
Earlier it was mentioned just using the harness from a donor steering wheel (what years exploder actually will work to take the harness...
-
Canyon Coolers reacted to CarreraX's post in the thread DIY: Bronco Raptor Paddle Shifters on Standard Steering Wheel with Love.
Awesome! So a new bronco raptor wheel will work (as long as I swap the boards ) or I can buy a used explorer wheel for the harness and...
-
Canyon Coolers reacted to WillinMA's post in the thread DIY: Bronco Raptor Paddle Shifters on Standard Steering Wheel with Love.
This is a great post and I followed the DIY and it was perfect to the tee! Did the same thing where I bought the Raptor steering wheel...
-
Canyon Coolers replied to the thread B-Pillar Braces recommendations?.I have had creaking from the C Brace bolts loosening. Also dust in there can even do it. I did the GOAT B Brace and the Ford...
-
Update: went with Krazy Horse brace available local to me. Will have to wait till spring so I can take off my full roof rack to install...
-
I installed the https://goatfabrication.com/products/goat-bronco-4-door-cage-cross-brace-stiffener works great! For the front half of...
-
Currently eyeing the Krazy Horse and Turn Off-road B-pillar braces to quiet down some of the shuddering effect I get throughout the...
-
Canyon Coolers replied to the thread E load vs C load tires - what's your pick?.I went with load range D. These have been great.
-
-
@Tonka53 Have you followed up with Filson customer service? Seems only fair that you share their resolution since you put them on blast...
-
I read through this entire thread waiting for this comment. Thank you. I’m not going to carry water for Filson. Don’t know anything...
-
Canyon Coolers reacted to HalfmuleFarmer's post in the thread Filson Brand - Not a Good Start with Like.
Well, this is the conundrum, right? A company makes stuff overseas, people complain it’s gone downhill. They make it domestically...
-
Don’t complain too much, you’ll get some chinese seamstress executed.
-
Canyon Coolers replied to the thread Seat comfort and support Question.Desert Does It makes these seat jackers that lift the front of the seat a bit. Cheap enough and made a big difference in comfort and...
-
Canyon Coolers reacted to SynnerSyndrome's post in the thread Seat comfort and support Question with Like.
Good Afternoon all, I was wondering what everyone’s opinions are on the Bronco Outer Banks. Is the seat well padded in the middle and...
-
Canyon Coolers replied to the thread Check Brake System warning light on '22 OBX with 2.7 liter engine..Went through all that same stuff, but under warranty. My dealer added s ome custom code and it went away, but its giving me a new error...
-
Canyon Coolers reacted to bronco504a's post in the thread My Bronco Ended Up Starting Something Bigger with Love.
thank you for the kind words, there is a lot of competition but that part of the adventure of starting a business, hope best of luck and...
-
Canyon Coolers reacted to Cooperhawk's post in the thread AIGMUX Interior LED Lights Installed - review & photos with Like.
I also installed them and they are very bright. At night it lights up the interior very well. I like them a lot.
-
Canyon Coolers replied to the thread Bronco owners — how are you keeping the cabin from cooking this summer? ☀️.Looks like a great solution when sleeping in the vehicle.
-
Best way around this kind of stuff is to get to know your local parts counters. Your Ford dealers often play the same game as the...
-
Canyon Coolers replied to the thread KC Fog Light Pocket Kit released..I did this, without a rely. I ordered a new headlight switch from Ford (about $55) with the fog switch built in, and simply tapped the...
-
Canyon Coolers reacted to Chrgnthru's post in the thread KC Fog Light Pocket Kit released. with Like.
Hey man.. Care to share how you went about getting this wired up with the fog switch? Just picked up this kit and would like to use that...
-
Canyon Coolers reacted to BoostedBronco's post in the thread Jay Leno features the Bronco Roadster Concept with Like.
I think it looks awesome.
-
Canyon Coolers replied to the thread Jay Leno features the Bronco Roadster Concept.LOL, I love that grill, but I owned a 73 for 20 years. Its the one I compare to all the new grills.
-
Canyon Coolers reacted to ZeoBandit's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
Probably at 260,000 miles now!
-
Canyon Coolers reacted to Nickhick's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
-
Canyon Coolers reacted to MDH's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
My guess is you use full synthetic oil, lots of highway miles, and easy on the gas and brake
-
Canyon Coolers reacted to Ducati1098's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
Factory oil pump belt? If so, this is going to prove a lot of haters wrong 😂
-
Canyon Coolers reacted to Agr142590's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
One Oil pan. Spark plugs. Fourth set of tires. Lost track on windshields…Maybe 5 best guess.
-
Canyon Coolers reacted to Agr142590's post in the thread Mileage leader: turned 250,000 miles a couple weeks ago. 2022 Bronco Wildtrak w/Hoss 3.0 with Like.
-
Back in a Bronco. Choose this beautiful color! -
Canyon Coolers replied to the thread CVF High Mount Intercooler install and testing.I have the Mishi Moto one and my coolant temps stay fine, I do get higher than I prefer oil temps at 85 mph on 37's. I also live at...
-
Canyon Coolers reacted to Glenjafett's post in the thread CVF High Mount Intercooler install and testing with Like.
While I love the size and added space, how much airflow to the radiator is being lost? Have you tracked coolant temps?
-
Canyon Coolers reacted to djcwardog's post in the thread Installed the Hellwig 7907 Rear Sway Bar Kit on my 2021 2-Door Big Bend V6 with Like.
Kevin, My use case is different than yours. Badlands trim level or even SAS would have been my choice otherwise. My stock Big Bend...
-
Canyon Coolers reacted to Full Metal Designs's post in the thread Transmission Cooler Kit Questions with Like.
That's a fair point. My goal isn't to build a "cheap" kit, it's to build a more cost-effective kit for the everyday guy. Toyotas have...
-
Canyon Coolers reacted to Full Metal Designs's post in the thread Transmission Cooler Kit Questions with Like.
I'm looking to develop a transmission cooler kit for the 2.7L, just seeing if there is a demand out there. The other kits look to be...
-
Canyon Coolers replied to the thread FOX FACTORY RACE SERIES 3.0 ARE THEY THE RIGHT CHOICE.You can do amazing tings with just the 2.5's if dialed in perfect. Your in a better position. I had to change springs more then once...
-
Canyon Coolers reacted to Gluestick's post in the thread Revamped B-pillar crossbar by AIGMUX for the Bronco with Like.
Well, tying the roll bars together reduces squeaks and rattles from the hard top parts shifting over bumps. Which is why I have the...
-
Canyon Coolers reacted to AIGMUX's post in the thread Revamped B-pillar crossbar by AIGMUX for the Bronco with Like.
I appreciate your sense of humor.
-
Canyon Coolers reacted to Gluestick's post in the thread Revamped B-pillar crossbar by AIGMUX for the Bronco with Haha.
Weird thing to complain about. In your car, you can play whatever you want… (mine plays banjos 🪕)
-
Canyon Coolers reacted to AIGMUX's post in the thread Revamped B-pillar crossbar by AIGMUX for the Bronco with Like.
Introducing our newly revamped B-pillar crossbar for the Bronco—the perfect companion for your summer adventures. For our upcoming...
-
Canyon Coolers replied to the thread Memorial Day 2026 Sales by Site Sponsors 🪖🫡 🇺🇸.Canyon Coolers was able to extend our sale.
-
Canyon Coolers reacted to PNBLWZD's post in the thread Active Grill Shutter aka Louvers - how do they work?? with Like.
Chatterbot to the rescue! Those are active grille shutters. They’re motorized flaps in front of the radiator that open and close...
-
Canyon Coolers reacted to TheKim's post in the thread Active Grill Shutter aka Louvers - how do they work?? with Like.
Bumping this old thread because I'm bored. I'm tempted to just break the louvers off my active grill shutter entirely, and let the...
-
Canyon Coolers reacted to ColonelAngus's post in the thread Active Grill Shutter aka Louvers - how do they work?? with Like.
Below is an excerpt from the shop manual for an Escape which has the same tech. Could be some differences but I'd imagine its the same...
-
Canyon Coolers reacted to HighVelocity's post in the thread And Done! Full Rockford Fosgate speakers, sub, amp install! with Like.
The sticker on the dash adds 47.58 watts.
-
as long as charge temps show better numbers for their use case it’s probably fine. I went down a rabbit hole trying to validate this...
