🛠 8/2/21 build Week Thread

[jwoobs]

I could, but it was basically empty inside.

Formatting cleaned up a little bit.

<AS_BUILT_DATA>
<VEHICLE>
<VIN>1FMDE5C3PMLAxxxxx</VIN>

<ERROR>
     <ERRORCODE>612</ERRORCODE>
    <ERRORMSG>  PCM DATA NOT FOUND</ERRORMSG>
</ERROR>

<ERROR>
     <ERRORCODE>613</ERRORCODE>
     <ERRORMSG>  BCE DATA NOT FOUND</ERRORMSG>
</ERROR>

<ERROR>
     <ERRORCODE> 614</ERRORCODE>
     <ERRORMSG>  CCC DATA NOT FOUND</ERRORMSG>
</ERROR>

<ERROR>
     <ERRORCODE> 615</ERRORCODE>
     <ERRORMSG>  SPDJB DATA NOT FOUND</ERRORMSG>
</ERROR>

<MISC_DATA>
     <TEARTAG></TEARTAG>
</MISC_DATA>

</VEHICLE>
</AS_BUILT_DATA>

Sponsored

 

[FloatingMoat]

Are you getting active modules for PCM and/or BCE? I'm not, but above that, I have a note "Module Information Found," and an active "Download File" button!

I have a 8/4 blend date, module info found to download, nothing under PCM Modules and tons of lines under BCE Modules

 

[CarStory]

Can you actually download the file?

I have an 06/30 blend date. I have a ton of info under BCE modules but no PCM module data. I have a download button but I wouldn't know how to read the file.

 

[jwoobs]

I have an 06/30 blend date. I have a ton of info under BCE modules but no PCM module data. I have a download button but I wouldn't know how to read the file.

It's just plain text on the inside, even if the file is a .ab

 

[KANE COUNTY ILLINOIS]

Can you actually download the file?

No, I don't think so! It asks me to open the file, it does nothing! So I guess I have nothing! My fingers are crossed for 08/05!

 

[Portapot]

So has anyone heard anything or seen any movement in their build? I know some from July were moved to 8/2 week. Very curious! Wondering if mine will actually get built on Thursday.

If we have a

I'm sitting at the following:

8/02 2907

So squeezing in between you and Portapot

ScubaSteve you hear any news on yours? Mine is still just showing In production with no PCM Modules etc....no movement reported. I wonder how real time the data in these sites refreshes?

 

[cazimi]

ScubaSteve you hear any news on yours? Mine is still just showing In production with no PCM Modules etc....no movement reported. I wonder how real time the data in these sites refreshes?

Checking the 7/19 thread, as of about 45 minutes ago, the 7/23 folks were seeing their modules populate (#2581 I believe). I'm 8/2 sitting at #2841, so maybe tomorrow for us?

 

[Portapot]

Checking the 7/19 thread, as of about 45 minutes ago, the 7/23 folks were seeing their modules populate (#2581 I believe). I'm 8/2 sitting at #2841, so maybe tomorrow for us?

Fingers Crossed. Thanks for the update Cazimi!

 

[scubasteve]

If we have a

ScubaSteve you hear any news on yours? Mine is still just showing In production with no PCM Modules etc....no movement reported. I wonder how real time the data in these sites refreshes?

Check my emails I haven't seen or heard anything and still shows "in production". Window sticker was last updated on 7/27 (date on the bottom) still showing my 8/2 blend date as normal.

As far as PCM modules, I haven't been following this thread or any additional look up items as I have been swamped with work so not sure if I can provide that info at the moment. If there is a link or something let me know and I'll enter info and get an answer of some kind for everyone.

 

[FloatingMoat]

Check my emails I haven't seen or heard anything and still shows "in production". Window sticker was last updated on 7/27 (date on the bottom) still showing my 8/2 blend date as normal.

As far as PCM modules, I haven't been following this thread or any additional look up items as I have been swamped with work so not sure if I can provide that info at the moment. If there is a link or something let me know and I'll enter info and get an answer of some kind for everyone.

https://www.motorcraftservice.com/asbuilt
Put in VIN, and should provide information...

 

[scubasteve]

https://www.motorcraftservice.com/asbuilt
Put in VIN, and should provide information...

So running this it gives me the following:

Module Information Found and a download button for .ab file. I'm on mobile but I'm assuming it's a text file.

Under PCM it lists nothing.
Under BCM it lists one line item labeled "G".

So I have no idea if that means anything one way or another.

 

[mpeugeot]

So running this it gives me the following:

Module Information Found and a download button for .ab file. I'm on mobile but I'm assuming it's a text file.

Under PCM it lists nothing.
Under BCM it lists one line item labeled "G".

So I have no idea if that means anything one way or another.

It means that nothing has been done with loading the bcm or pcm modules. Was your tear tag populated? (3 Letter code) That's the first thing I noticed going, then BCM, then PCM if I remember correctly.

 

[Tricky Dick]

So running this it gives me the following:

Module Information Found and a download button for .ab file. I'm on mobile but I'm assuming it's a text file.

Under PCM it lists nothing.
Under BCM it lists one line item labeled "G".

So I have no idea if that means anything one way or another.

I got the same (lack of) info. I opened it with Notepad on PC.

 

[scubasteve]

It means that nothing has been done with loading the bcm or pcm modules. Was your tear tag populated? (3 Letter code) That's the first thing I noticed going, then BCM, then PCM if I remember correctly.

I do have the tear tag (three letter code) followed by a data code that reads 2020 with a bunch of letter "F" after it.

I suppose that's a start and I'll check again tomorrow but that's all I got friends.

 

[sliwa]

So running this it gives me the following:

Module Information Found and a download button for .ab file. I'm on mobile but I'm assuming it's a text file.

Under PCM it lists nothing.
Under BCM it lists one line item labeled "G".

So I have no idea if that means anything one way or another.

Exactly what mine shows. The download file shows nothing, or at least nothing I could see on mobile.
I’ve been refreshing my email like crazy since seeing another 8/2 week say they got bumped again!

Sponsored