What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[ducksface]

https://www.harborfreight.com/search?q=icon magnetic mat

Probably some on amazon too.
It just flops over the top of yhe toll bar and hangs down.

The cameras and monitor fit perfectly in th harborfreight version of a pelican box

Sponsored

 

[hoseclamp]

35" toyo mt 6ply, black rhino beadlocks. Lights in place. Fenders. Ford Procal tune complete for the 2.3. Tomorrow, forscan tuning, set up the aux light/fog triggers, and hunt for boost tubes. The AFE kit I have, only up to 2025. Oops. Lol.

 

[Returntothefog]

Hit 50k!
2025 4Dr Heritage.
Got her 4/27/25, 1 year 4 month and like 6 days or so to hit 50. 2/3 of it are just my daily commutes.
Lifetime Mpg is sitting at 19.2.

Will do trans fluid, filter, transfer case fluid, and a coolant drain and fill with oil change for labor day weekend

 

[chopperbobby]

Added some color. Air assault

 

[Ironiguana]

Fixed a bent sidestep that met a rock.

 

[agentdarnell]

Did a little ting. Now i should hopefully have more light. Ill take some pics or videos after goes dark.

⁹

 

[agentdarnell]

I still need to adjust them.

 

[Charlie Mike]

I finished mounting a universal Maxtrax mount on the OEM roof rack.

 

[VirginiaHeritage]

I figured the Bronco needed a good test drive for the new transmission and transfer case, so we drove from Northern VA to Hilton Head. Total road time 9 hours, about an hour longer than expected due to construction zones. Bronco runs great! We’ll head back after a few days of too much drinking and seafood. We had the kids and grandbabies join us and everyone is having a great time. I only wish we could drive on the beach here!

 

[Ironcreek]

After several false starts finely finished installing a Starlink mini. First attempt was attaching it to the BRaptor cross-brace however completely stripped 2 bolts with another left spinning on the brace (only able to remove on bolt). The finished product is from Turn Offroad and their overhead molle panel.

The only downside was having to order both the front and rear panel when I only wanted/need the rear. Other than that I have no complaints about the service or panel.

Installation was straight forward with a slight caveat. The “normal” installation only provides an inch clearance to the roof and since the sole reason for the panel was the Starlink I needed more room to mount and have a decent amount of headroom for ventilation we reversed the side brackets ending up with close to 2 ½ plus inches. Attached the Starlink to a low-profile magnetic base with no issues running a 6-foot power cable back to the rear power port.

Installing the panel this way also reduces the rear headroom for the backseats which in our case is not an issue as we treat the BRaptor as a 2-seater. Both front seats are always all the way to the rear (I’m 6-9, wife is 6’)

 

[Broncarado]

Added the IAG 4pc interior lights, and the Amber Grille lights today. Also offroaded Imogene Pass (Telluride to Ouray) earlier in the week.

 

[agentdarnell]

Well I found a security drawer locally for 250.00 so it is now installed. Now i have a place for recovery gear. Now i need a kinetic rope to add and upper molle and should be good for a while. Had the molle on order but that order got canceled.

 

[steely]

New member/ owner here. Picked up my 26 about 2 weeks ago 7MT blue base 2 door. 550 miles on the clock ish. So far just mabett flaps, floor mats and a ceramic coat. waiting on some protection/accessories this week as well as a factory roof rack (on order was factored in purchase price. this little truck is a BLAST to drive! I drove it around for a few hours after I picked it up from the dealer.

 

[orion]

Added the IAG 4pc interior lights, and the Amber Grille lights today. Also offroaded Imogene Pass (Telluride to Ouray) earlier in the week.

I did the same...

...well, the Imogene Pass part.

 

[Broncarado]

Love it!!!!!

I did the same...

...well, the Imogene Pass part.

Sponsored