Show us your installed wheel / tire upgrades here! (Pics)

[BigShan808]

Been rockin' on stockies ridin' on the RC N3 2" coilover lift kit the past year. Finally found a steal with these brand new MT Baja Legend EXP 295/70r18s. She sitting beefy. The wife is happy!

Sponsored

 

[Species8472]

Installed matte black Method 703 17x8.5 0 offset, Goodyear Wrangler Boulder MT 35x12.5
2025 Badlands Sasquatch

New wheel+tire weighs 97 lbs 8oz total, rim weighs 27 lbs 9oz.
My stock wheel & tire weighed 91 lb 4oz.

 

[Ctimrun]

Black Rhino Rapid 17 x 8.5 0 offset wheels and Goodyear MT 315/70/17 tires, crash bars removed. Stock Big Bend suspension, have Eibach coilovers ordered but they haven’t arrived yet.

.

 

[subydude]

Hey guys/gals,

im subydude (OG Subaru wheel dealer), I’ve been dormant for a bit but on 12/31/2025 it was love at first drive.

I’ve had these wheels sitting In My garage the last 2 months. I had a bunch of excuses not to put them on. But today…

this is just the first of many wheels on Orions (yes, I named my bronco).

setup.
Stock (as in factory badlands with Sasquatch package)
17x8.5 wheels zero offset.
Hubrings
Big ass smile.

As much as I love this setup I have a gazillion other wheels to put on. If you are keen on this setup. I will sell this setup as I have another set of wheels I will be mounting shortly. HMU.

subside

 

[Scooter M'Gee]

New set up......17x8.5 ET10 Fuel Hype's with 35x12.50 Toyo Open Country RT Pro's.

 

[mmills023]

I love this look! Question, do you have the SAS package? I have a 2026 Badlands with the SAS package and I am trying to figure out if these would fit? I would use my 35's at first, but just curious about your setup. Also it looks like you were thinking about going with the lift blocks, why that decision vs others?

Sorry for basic questions!

Thank you very much

17x9 Weld Crux in Bronze, -12 offset
Wrapped in 37x12.5 Mickey Thompson Baja Boss

Love the way they look on the blue.

Fitment note: I am lifted on Eibach 2.0s. Previously I ran 0 offset VR Forged 17s w/ 37" BFG K02s and had no issues. With this new setup I did have rubbing on the stock rock rails (removed them, will be modifying them to fit) as well as the fender liners (ordered the JKS kit to fix that).

 

[lethalchristy]

I love this look! Question, do you have the SAS package? I have a 2026 Badlands with the SAS package and I am trying to figure out if these would fit? I would use my 35's at first, but just curious about your setup. Also it looks like you were thinking about going with the lift blocks, why that decision vs others?

Sorry for basic questions!

Thank you very much

I do have SAS but I also installed the Eibach 2.0 coilover lift. Not sure these 37s would fit at all without that. Even with the lift I needed the JMS clearance kit.

 

[mmills023]

and the clearance kit is the "lift blocks" from them?

I do have SAS but I also installed the Eibach 2.0 coilover lift. Not sure these 37s would fit at all without that. Even with the lift I needed the JMS clearance kit.

 

[lethalchristy]

and the clearance kit is the "lift blocks" from them?

No they are plates to replace the ends of the front recinforcements and brackets to move the fender liners further into the wheel well to clearance the tire when you turn.

I also had to trim about an 1.5" from the OEM rock rails.

 

[mmills023]

Oh - OK!

Thank you for that. Last one...how much additional lift did the Eibach 2.0 coilover's provide?

I love your setup - so wanting to replicate.

No they are plates to replace the ends of the front recinforcements and brackets to move the fender liners further into the wheel well to clearance the tire when you turn.

I also had to trim about an 1.5" from the OEM rock rails.

 

[lethalchristy]

Oh - OK!

Thank you for that. Last one...how much additional lift did the Eibach 2.0 coilover's provide?

I love your setup - so wanting to replicate.

I'd say about 2". We didn't measure before & after.

 

[airball50]

Pretty mild build compared to a lot of the awesome rigs I see on here but figured I would post anyway in case it helps someone out. 2025 Outer Banks with a 2" Rough Country strut lift. Method MR 316 17" rims with a zero offset (17x8.5) on BFGs K03 285/75/17. Experienced a decent amount of rub at full lock with OEM crash cars; however, because my daughter will be driving it a lot, I didn't want to completely pull the crash bars so swapped in the Ready Lift high clearance crash bars and they worked great. Zero rub; not even close (should have gone a true 35"!). Rides better than stock in my opinion but you can definitely sense the heavier weight of the tires.

 

[Ft. Worth Rob]

Pretty mild build compared to a lot of the awesome rigs I see on here but figured I would post anyway in case it helps someone out. 2025 Outer Banks with a 2" Rough Country strut lift. Method MR 316 17" rims with a zero offset (17x8.5) on BFGs K03 285/75/17. Experienced a decent amount of rub at full lock with OEM crash cars; however, because my daughter will be driving it a lot, I didn't want to completely pull the crash bars so swapped in the Ready Lift high clearance crash bars and they worked great. Zero rub; not even close (should have gone a true 35"!). Rides better than stock in my opinion but you can definitely sense the heavier weight of the tires.

Looks nice. I have the +25 316’s on my non-SAS OBX. I was worried about too much tread poke but yours looks good with the 0.

 

[airball50]

Looks nice. I have the +25 316’s on my non-SAS OBX. I was worried about too much tread poke but yours looks good with the 0.

Thanks!! Too be 100% honest, if I could do it over, I opt for just a wee bit less poke! But overall, happy with it.

 

[c0ncept]

25 Big Bend. 2" spacer lift, Method 709HD's 17x8.5 +25 offset, 315/70/17 Goodyear's.

Sponsored