PRO LIFT for HOSS 3.0 / Fox Available

[Loreas]

Who has already installed the E30-35-056-01-22 kit, please tell us what spring numbers you had.

Sponsored

 

[adamruiz2001]

Does anyone know if they sell the F31-35-056-01-RA (rear spring, non HD) without buying the 4 spring kit?

I do not want to buy the HD spring, as it might be to harsh if I am not carrying the extra weight need to make that spring run smooth.

 

[Wyld2dr]

Does anyone know if they sell the F31-35-056-01-RA (rear spring, non HD) without buying the 4 spring kit?

I do not want to buy the HD spring, as it might be to harsh if I am not carrying the extra weight need to make that spring run smooth.

Is it this one? e30-35-056-01-02

 

[adamruiz2001]

Is it this one? e30-35-056-01-02

No, the non HD versions is F31-35-056-01-RA, I ordered from Eibach directly by calling. ($99 plus shipping)

Here is my write up on my lift. Just scroll further down and I have before and after pics along with measurements of the before and after lift.

https://www.bronco6g.com/forum/thre...-lift-in-rear-due-to-load.122051/post-2719680

 

[Wyld2dr]

No, the non HD versions is F31-35-056-01-RA, I ordered from Eibach directly by calling. ($99 plus shipping)

Here is my write up on my lift. Just scroll further down and I have before and after pics along with measurements of the before and after lift.

https://www.bronco6g.com/forum/thre...-lift-in-rear-due-to-load.122051/post-2719680

You are comparing two different identifiers for the Eibach Pro-Lift-Kit suspension for the 2021–2026 Ford Bronco: [1, 2]

• F31-35-056-01-RA: The specific part number stamped directly on the rear coil spring itself.
• • e30-35-056-01-02 (E30-35-056-01-02): The Eibach kit part number for a set of two front or two rear springs, typically referring to the front spring upgrade for HOSS 2.0 or 3.0 Broncos. [1, 2, 3, 4]

They are not in competition; one is the individual component while the other is the boxed set.

 

[adamruiz2001]

You are comparing two different identifiers for the Eibach Pro-Lift-Kit suspension for the 2021–2026 Ford Bronco: [1, 2]

• F31-35-056-01-RA: The specific part number stamped directly on the rear coil spring itself.
• • e30-35-056-01-02 (E30-35-056-01-02): The Eibach kit part number for a set of two front or two rear springs, typically referring to the front spring upgrade for HOSS 2.0 or 3.0 Broncos. [1, 2, 3, 4]

They are not in competition; one is the individual component while the other is the boxed set.

I know this, but you replied asking if I was looking for the "E" version, but in my question above that you replied to, I was asking for the non HD rear springs part number without having to buying the "kit", and so my answer to your question was no, that is not the part number for the rear only springs, and I gave you the rear only part number if you were wanting to order those without buying the kit. I guess we just had a miscommuncation, no biggie.

But the info you put above is good for anyone that needs it broken down.

 

[Wyld2dr]

I know this, but you replied asking if I was looking for the "E" version,

But the info you put above is good for anyone that needs it broken down.

I was asking to learn, I wasn't trying to educate you or give advice. Thanks!

I ordered the 2 springs kit for $300. The FOX HD shocks aren't compatible with Hoss 3.0. Doh.

 

[adamruiz2001]

I was asking to learn, I wasn't trying to educate you or give advice. Thanks!

I ordered the 2 springs kit for $300. The FOX HD shocks aren't compatible with Hoss 3.0. Doh.

Gotcha, I was getting confused, my bad.

Sponsored