Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts.

[swooshdave]

As mentioned before I have been using https://studio.tripo3d.ai/ to take the 2d ford logos and having the AI generate 3D STL files of the statues. It's pretty fun. Despite the haters. (ahem @ArtHughes)

Super sharp eyes will notice the Sasquatch base is the Ford oval...

Sponsored

 

[ejedmo5]

As mentioned before I have been using https://studio.tripo3d.ai/ to take the 2d ford logos and having the AI generate 3D STL files of the statues. It's pretty fun. Despite the haters. (ahem @ArtHughes)

Super sharp eyes will notice the Sasquatch base is the Ford oval...

I feel like this is a good excuse to try and electroplate a 3d print and make an emblem like RR’s spirit of ecstasy

 

[murrman]

I had to add an angle on the back so I could better see them with my glasses on. I am waiting for one day when I ask someone to use the aux switches and they hit the label instead.

Would you mind sharing your model file?

 

[swooshdave]

Would you mind sharing your model file?

You'd have to have the same switches as me.

 

[swooshdave]

I feel like this is a good excuse to try and electroplate a 3d print and make an emblem like RR’s spirit of ecstasy

I'll try a silver filament and see it's close.

 

[murrman]

You'd have to have the same switches as me.

I’d be able to modify it for my switches. I’d just use your overall design and dimensions (if that’s ok).

 

[swooshdave]

I’d be able to modify it for my switches. I’d just use your overall design and dimensions (if that’s ok).

If you use OnShape it's publicly available. If not I can also remove the text.

 

[KillerPenz]

Would you mind sharing your file?

I'll dig it up when I get home tonight and share it. I will admit it didn't help much though.

 

[murrman]

I 3d printed some labels for the two aux switches I’m currently using. I’ve been tweaking the dimensions to try and find the sweet spot. I decided to go with a visual label rather than spelling it out.

 

[ejedmo5]

For those who have printed my door pockets I have made a removable bin for the large pocket. I found I would use that one for trash from time to time so this just makes life a little easier. Posting the models on my Maker world for those who want them.

https://makerworld.com/en/models/2218370-bronco-door-pocket-inserts#profileId-2412257

e

 

[FstFrd00]

very cool! By any chance have you modelled anything like that for the rear doors?

 

[ejedmo5]

very cool! By any chance have you modelled anything like that for the rear doors?

I haven't purely because you have to take the whole door panel off, cut the plastic welds etc and thats just not worth it to me

 

[FstFrd00]

understood.
The hard part, in my mind, is reinstallation of the pockets.
The door panels are too thin for riv-nuts; just using screws ,similar to the current offerings, are weak. Leaving the option of redoing the plastic welds.

 

[ejedmo5]

understood.
The hard part, in my mind, is reinstallation of the pockets.
The door panels are too thin for riv-nuts; just using screws ,similar to the current offerings, are weak. Leaving the option of redoing the plastic welds.

Yeah exactly would have to plastic weld or epoxy i think the best option is probably create an insert for inside the net and maybe double sided tape so it doesn't move around, or have a part that tucks into the frame. I just am a person who doesn't like to make permanent changes

 

[ejedmo5]

Credit to the OP on maker world but this was fun and cool to make.

link here if anyone else is interested was really easy.

https://makerworld.com/models/143578?appSharePlatform=copy

Sponsored