What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[BD6G]

Over the weekend I’ve added the new @Mountains2Metal rear tailgate MOLLE panel and pack out mount. A new hammock mount system that will be on the market soon that replaces the factory latch points. The 4th photo is me in the makers wife’s Bronco using the hammock system for reference I’m 6’3 255 and it supports me well. The Wefoka dash cam and upgraded my awning mounts to the Trailrax 90 degree mounts for their rack. Unfortunately the items I have getting powder coated are not available yet but was hoping to add those as well but it will give me another future weekend project to work on.

Sponsored

 

[AZ_Craig]

I figured out why the emergency flashers mysteriously went off TWICE while parked in the garage.

I was doing a bit of cleaning and rearranging in the back; left the rear tailgate open while I went inside for a few minutes, came out and the flashers were on! ??

Ahhhh, caught the source in the act before it happened the third time.
He is one smart[ass] cat looking for cause/effect mental stimulation, I think.

Maybe I need a cover for these switches similar to the GOAT dial cover someone made a while ago to keep his dogs from activating those controls while driving.

Just one more reason I am a dog person. And no fu-fu that can sit in your front seat and turn on your trail turn assist while driving, 155 pound Newfoundland thank you.

 

[GoHack]

Got my Ford Software Recall at the dealer done on Friday.
It took about an hour and a half.

 

[CarmeloS]

Dropped my RTR grille at the shop as my parents drop by like Frank and Marie (Everyone Loves Raymond), and I don't want them to see it, then got her a car wash

I'll have my RTR put on in January, after I can recoup a little from Christmas

 

[RustysBronco]

Hacked the APIM to update Sync 4 to the MY2025 style and swapped out the OEM analog cluster with CaRobotor's.

 

[cmtaz]

Finished replacing the crappy ford subwoofer, with a decent sub. essentially a drop in and splice replacement. Also added some sound deadening.

 

[CrystalRedTintCoat]

Hacked the APIM to update Sync 4 to the MY2025 style and swapped out the OEM analog cluster with CaRobotor's.

sick! would love to know how you did this.

 

[CrystalRedTintCoat]

Replaced OEM tires with Mickey Thompson Baja Boss A/Ts. 35x12.5R17LT.

 

[RustysBronco]

sick! would love to know how you did this.

https://carobotor.ca/product/bronco-digital-dashboard-gen6/

 

[Scedwin]

Installed a Turn Offroad Tailgate Reinforcement. They estimate ~60 mins for installation but was on my own and took my time for perfect alignment which was a little over 2 hrs. This thing is high quality and solid!

 

[Whiskey Bizness]

Today was New Suspension Day... one of the lesser known days of the 12 Days of Christmas.

• Bilstein 6112 struts and springs
• Accutune front Upper Control Arms

The improvement in ride quality over the stock Badlands Sasquatch suspension is huge. The Bronco feels much more stable and planted now than it did previously. Money well spent.

 

[Mean Green]

Ordered my new Ford Performance exhaust…

 

[N8do]

Over the weekend I’ve added the new @Mountains2Metal rear tailgate MOLLE panel and pack out mount. A new hammock mount system that will be on the market soon that replaces the factory latch points. The 4th photo is me in the makers wife’s Bronco using the hammock system for reference I’m 6’3 255 and it supports me well. The Wefoka dash cam and upgraded my awning mounts to the Trailrax 90 degree mounts for their rack. Unfortunately the items I have getting powder coated are not available yet but was hoping to add those as well but it will give me another future weekend project to work on.

Over the weekend I’ve added the new @Mountains2Metal rear tailgate MOLLE panel and pack out mount. A new hammock mount system that will be on the market soon that replaces the factory latch points. The 4th photo is me in the makers wife’s Bronco using the hammock system for reference I’m 6’3 255 and it supports me well. The Wefoka dash cam and upgraded my awning mounts to the Trailrax 90 degree mounts for their rack. Unfortunately the items I have getting powder coated are not available yet but was hoping to add those as well but it will give me another future weekend project to work on.

 

[N8do]

I must get one of those hammock kits!!!
Who, where, when, how..............

 

[Beach_Bum]

I must get one of those hammock kits!!!
Who, where, when, how..............

@Meraki Hammocks I would recommend Meraki Hammocks. They were the original designers of the bracket/system. Since their start, I've seen a lot of others that have copied the design.

Sponsored