Updated:Fog lights added and connected to factory connector

[conor1123]

Edit: doesn’t seem like the 25s come with it anymore Sad day! I’m curious now if I were to buy an older harness if it would work.

Post showing no connectors: https://www.bronco6g.com/forum/threads/factory-fog-light-switch.22937/page-79#post-2562015

Hey friends! Anyone test this harness theory on a 2025? Just bought a 25 badlands sasquatch (lux with parking sensors) and can’t seem to find this connector under the tow hooks.

I’ll be taking the bumper off next weekend to dig a little deeper incase they moved it. Hopefully it wasn’t removed since I ordered all the parts

Sponsored

 

[vjose8]

Edit: doesn’t seem like the 25s come with it anymore Sad day! I’m curious now if I were to buy an older harness if it would work.

Post showing no connectors: https://www.bronco6g.com/forum/threads/factory-fog-light-switch.22937/page-79#post-2562015

Hey friends! Anyone test this harness theory on a 2025? Just bought a 25 badlands sasquatch (lux with parking sensors) and can’t seem to find this connector under the tow hooks.

I’ll be taking the bumper off next weekend to dig a little deeper incase they moved it. Hopefully it wasn’t removed since I ordered all the parts

Any update on your fog light wiring quest? I just received my Bronco (same spec as you) on Friday and I don’t see the plug either.

 

[conor1123]

Any update on your fog light wiring quest? I just received my Bronco (same spec as you) on Friday and I don’t see the plug either.

Harness got here last week, haven’t had a chance to install just yet I’ll circle back here and post when I test it out

 

[vjose8]

Harness got here last week, haven’t had a chance to install just yet I’ll circle back here and post when I test it out

I wish you luck. Hopefully the harness is all that’s needed to make this work.

 

[vjose8]

To anybody that is interested in adding fog lights and having them work with the factory fog light switch on a 2025 with the Lux package and the factory modular bumper. I have successfully completed this task. Ford eliminated the fog light harness that was once a part of the bumper harness with front proximity sensors. My Bronco has the elusive C192 connector and I was able to confirm that all of the required wires that are needed to complete this task existed between the C203 and C192 connectors. I purchased a new bumper harness (part # M2DZ-15K867-H) and a new headlight switch with the fog light button (part# M2DZ-11654-DC) and a aftermarket harness that converts the factory fog light plug to a Diode Dynamics. If anyone has any questions let me know and I will try to answer them.

 

[Define_Nothing]

To anybody that is interested in adding fog lights and having them work with the factory fog light switch on a 2025 with the Lux package and the factory modular bumper. I have successfully completed this task. Ford eliminated the fog light harness that was once a part of the bumper harness with front proximity sensors. My Bronco has the elusive C192 connector and I was able to confirm that all of the required wires that are needed to complete this task existed between the C203 and C192 connectors. I purchased a new bumper harness (part # M2DZ-15K867-H) and a new headlight switch with the fog light button (part# M2DZ-11654-DC) and a aftermarket harness that converts the factory fog light plug to a Diode Dynamics. If anyone has any questions let me know and I will try to answer them.

>aftermarket harness that converts the factory fog light plug to a Diode Dynamics. <

I'm swapping a capable bumper for the MOD.

This is the part I've been looking over for the last hour or so. How did you wire it up?

My current plan is to wire the SSC3 in the diode kit to the factory fog switch I already have, tap the backlights to the marker lights, and run the SSC2 to Aux 4.

 

[4x4TruckLEDs.com]

>aftermarket harness that converts the factory fog light plug to a Diode Dynamics. <

I'm swapping a capable bumper for the MOD.

This is the part I've been looking over for the last hour or so. How did you wire it up?

My current plan is to wire the SSC3 in the diode kit to the factory fog switch I already have, tap the backlights to the marker lights, and run the SSC2 to Aux 4.

grab the fog kit from us: https://www.4x4truckleds.com/vehicle-specific/ford-bronco/2021-bronco/fog-lights/

Then this pigtail: https://www.4x4truckleds.com/diode-...wires-w-backlight-tap-h11-h8-h9-880-881-pair/

 

[Muffin1]

grab the fog kit from us: https://www.4x4truckleds.com/vehicle-specific/ford-bronco/2021-bronco/fog-lights/

Then this pigtail: https://www.4x4truckleds.com/diode-...wires-w-backlight-tap-h11-h8-h9-880-881-pair/

 

[Arvidian]

OMG I love you! Thank you for researching and getting the part number for the harness! How hard of a task was it to install the new harness? I already have the fog light switch and I have the raptor fogs installed using the overhead switches. Was just waiting for the solution. Thank you!

To anybody that is interested in adding fog lights and having them work with the factory fog light switch on a 2025 with the Lux package and the factory modular bumper. I have successfully completed this task. Ford eliminated the fog light harness that was once a part of the bumper harness with front proximity sensors. My Bronco has the elusive C192 connector and I was able to confirm that all of the required wires that are needed to complete this task existed between the C203 and C192 connectors. I purchased a new bumper harness (part # M2DZ-15K867-H) and a new headlight switch with the fog light button (part# M2DZ-11654-DC) and a aftermarket harness that converts the factory fog light plug to a Diode Dynamics. If anyone has any questions let me know and I will try to answer them.

 

[vjose8]

OMG I love you! Thank you for researching and getting the part number for the harness! How hard of a task was it to install the new harness? I already have the fog light switch and I have the raptor fogs installed using the overhead switches. Was just waiting for the solution. Thank you!

It’s not hard at all, it took me about an hour and a half. You will need to unplug the bumper harness from C192 then unbolt and remove the front bumper from the vehicle. Next you will need to unassembled the bumper enough so that you can remove/replace the original harness with the new harness. Reassemble the bumper and install it back onto the vehicle. Plug the new bumper harness to C192. Install the new headlight switch and program the computers using FORScan. I attached a screenshot of the post I used for to enable the fog lights.

 

[Arvidian]

You're the man! Thank you!

 

[Arvidian]

@Whiskey Bizness A solution finally popped up for fog light switch on MY25!

 

[Whiskey Bizness]

@Whiskey Bizness A solution finally popped up for fog light switch on MY25!

Thanks for tagging me into this! I just saw the other replies and will order that harness.

 

[Arvidian]

Right on. Ordered mine the other day. A lot more inexpensive than I thought originally. Was just over $100 with tax and shipping at ford parts giant.

 

[vjose8]

You're the man! Thank you!

You’re welcome.

Sponsored