What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Ducati1098]

@Ducati1098 Do you have any visibility on differing part numbers for the wiring harness? I have a hard time believing that Ford would have 2 different wiring harnesses based on whether a trim comes with fog lights or not especially considering the HIGH/LUX packages have merged. I'm thinking it is the same harness and the associated pigtails are just better hidden on the MY'25 Broncos than they were on previous model year Broncos.

Catalog doesn't show any updates for 25, but it also likely isn't up to date.
However it wouldn't surprise me at all if they did change it. There are 5 different front bumper harness that I can see, not even counting the one for the Braptor.

If the harness was much larger, they likely wouldn't have multiple versions. However due to how short it is, and how it's pre-installed on the bumper at the factory, I could definitely see them changing it to remove the fog light connectors that were not being utilized.

Sponsored

 

[Whiskey Bizness]

Installed the Havoc Molle tailgate panel with pouches that I had for my E-Collars, collar charging cables, tire repair kit, soft shackles, and survival kit.

Are you still happy with this molle panel? I'm shopping for options right now and this one came up in a Google search.

 

[Ducati1098]

@Beach_Bum I just looked up a 2025 using HVBoM and it does in fact have a brand new harness part number.

 

[dgorsett]

I replaced the 50 year old 48 inch Handyman jack with a shiny new and straight 42 inch that fits between the headlights better. I'll get skerd before I get higher than that.

 

[mjcutri]

Installed the Front Runner Tailgate Table. I took advantage of the memorial day sale to pick it up for 20% off.

The only negatives I have so far is that the Bronco specific cutting board (shaped to fit around the tailgate bump) isn't as nice as the standard cutting board (which is butcher block wood and is also included with the Bronco kit) and it uses jack nuts that are a pain to get tight, but I couldn't justify spending almost 2x for the Trailgator just to avoid drill a couple holes.

I may end up replacing the included board with a piece of butcher block cut to match the included piece.

 

[Whiskey Bizness]

@Beach_Bum I just looked up a 2025 using HVBoM and it does in fact have a brand new harness part number.

Thank you for looking into that for us.

 

[SoCal]

installed a Sasquatch sticker I found at this cool old school gift shop outside of Zion in Virgin Utah last week

 

[Arvidian]

Thank you for looking into that for us.

Yea, thank you for checking. A bummer for sure.

 

[Xinnes88X]

I replaced the 50 year old 48 inch Handyman jack with a shiny new and straight 42 inch that fits between the headlights better. I'll get skerd before I get higher than that.

Can you share what hardware you used to mount it in this specific location? TY

 

[dgorsett]

Can you share what hardware you used to mount it in this specific location? TY

I just used these, mounted with 5/16 carriage bolts, on the light bracket that came on the safari bar. My bar is pretty low, looks like you have a taller one.

https://www.amazon.com/dp/B0BDDN6YV9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

 

[Mean Green]

Cleaned out all the loose items including the tow gear, tire repair kit and the roof bags. I was surprised at how much I got in them. Phone cord cause the factory charger sucks…

 

[Whiskey Bizness]

Added a JTops Bimini today.

 

[jeffreybehr]

WARNING--BORING! Changed my engineoil and filter at 650 miles; used a Motorcraft filter and Kirkland full-synthetic 5W-30. Saved the packages to document the change.

 

[Arvidian]

Installed Raptor fogs on my Badlands into Aux 1 & 2 since there are no harnesses in the bumper on 25’s. If a better wiring solution appears, then I’ll change them out.

 

[Demon4x4]

Removed my wipers and cowl to clean it out and get it to seat properly (had been like a 1/2-3/4” gap between the windshield), and while I was in there I re-routed, swapped the ditch lights, and swapped all the hardware out for stainless steel (my old bolts were black oxide and were rusting against the stainless steel brackets)

Sponsored