Alternative ARB twin compressor mounting location: upper roll bar molle panel

[Dickzip]

I run a similar mount but built a bracket off the back of the roll bar and have an access door to store the hoses from my moreflate

how much for a passenger side Twin ARB bracket?

Sponsored

 

[Copperhorse73]

Justin, do you have the JCR cargo rack also? I can see the bracket it sits on, if so, does the twin arb get in the way or rattle when in use or on the trail? please send photos u can DM Me if u want

I have the @Mountains2Metal flip up cargo tray. Since the compressor is on the outside it’s in the way of nothing, and no rattles

 

[mrjking2000]

Justin, do you have the JCR cargo rack also? I can see the bracket it sits on, if so, does the twin arb get in the way or rattle when in use or on the trail? please send photos u can DM Me if u want

it is the JCR rack! that rack is awesome. No vibration or rattle whatsoever.

 

[Mikerider]

how much for a passenger side Twin ARB bracket?

if your local to the seattle area I can build another fairly easy.

 

[Bikeric]

I am personally leaning toward this solution from DV8Offroad. Seems like a great spot and adds a little more storage.

https://dv8offroad.com/collections/.../products/bronco-air-compressor-mount-storage

I just went with the DV8 myself. It makes for a nice solid and hidden addition. I ran the air lines to 2 air chucks mounted outside on my steel rear bumper (I don't run a spare tire so the tire clearance divot in the bumper is available). On/Off switch is mounted inside on my plastic panel next to the subwoofer. I wired in a 150Amp relay under the hood and use Aux Switch 3 to energize the relay to send power back to the unit. I ran the wiring into the cab and down the driver side next to the cable tray.

Sponsored