24' Manuals input please

[Rebel Bronc]

49k miles on my ‘22 Badlands 7spd. Occasional scraping noise but still runs very well.

Sponsored

 

[Greenbronc]

That's interesting about the feel changing, I've never noticed anything like that with mine. I did install the Steeda spring pretty early on and I highly recommend it. Much better feel.

It was an odd feeling, almost like the first 30% of the pedal was really weak then it caught. the steeda spring still shows awaiting shipment so who knows when it will arrive.

 

[CanadaBaseBronco]

This!!! ^^^^

I take my kids to school (yes in my two door), and they both have their Stanley's. Awkward. My Yeti Rambler doesn't fit in the cup holder, but it has a screw on lid so it doesn't spill.

I'm at about 1700 miles. No noise from transmission, all I get is the driveshaft coming off of the transfer case going forward that makes the annoying noise on warmer days after 20 miles or so.

I am very happy I chose the manual. I do wish there was a little bit more "feel" from the clutch pedal. With the quiet engine, exhaust and lack of a good tach, it can be easy to over rev from dead stop. Plus the start/stop is just obnoxious. Overall it makes the drive so engaging though.

What is the driveshaft coming off of the transfer case noise you are referring to? Thanks.

 

[Bronccraig]

Hey guys/gals - I'm thinking of trading in my non SAS Bronco Auto for a SAS manual after reading pages and pages of MT issues I have no idea if these are worked out or still an issue. Looking for advice on if I should or should not get an MT, I would love a 3 peddle but don't want it if there are still the issues, thanks for any feedback!

2023 CG BB 2 dr MT..has been great, the 2-3 pull in it is great…

 

[CanadaBaseBronco]

Agreed. Had another one apart last week, zero signs of damage or any issues. Just the typical scraping noise.
Don’t let the noise scare you out of enjoying the manual. It’s not hurting anything if you can deal with the sound.

Have you had anyone come in with the issue that whenever they press in the clutch pedal between low gears like R-1, 1-2, 2-3 that there is a loud clunk/rattle somewhere in the drivetrain? I have had my clutch and my transmission replaced but my Bronco still does that so I have no idea what it is doing. I haven't had any actual issues because of it but it definitely is a little bit worrisome with how jarring it is sometimes. Doesn't sound normal.

Thanks.

 

[Ducati1098]

Have you had anyone come in with the issue that whenever they press in the clutch pedal between low gears like R-1, 1-2, 2-3 that there is a loud clunk/rattle somewhere in the drivetrain? I have had my clutch and my transmission replaced but my Bronco still does that so I have no idea what it is doing. I haven't had any actual issues because of it but it definitely is a little bit worrisome with how jarring it is sometimes. Doesn't sound normal.

Thanks.

No can’t say I’ve ever had that issue come up before.

 

[CanadaBaseBronco]

No can’t say I’ve ever had that issue come up before.

Thanks.

 

[FourHorses]

What is the driveshaft coming off of the transfer case noise you are referring to? Thanks.

https://www.bronco6g.com/forum/threads/2024-badlands-unknown-sound.100064/

Sponsored