What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[KRAKEN]

FORD should have at least given the rest of us a full bank of switches using dummy switches... I'm jealous.

Cause you have all 6 of these.

Sponsored

 

[DriveAllNight]

FORD should have at least given the rest of us a full bank of switches using dummy switches... I'm jealous.

Or better yet, programable switches, it really wouldn't be hard. Plenty of aftermarket switches that you can do that with. I hate blanks

 

[BAUS67]

FORD should have at least given the rest of us a full bank of switches using dummy switches... I'm jealous.

If you got the Squatch then the only one missing is the disco.

 

[KRAKEN]

...yeah, I'm missing that one, but that's one too many.

 

[mikec426]

...yeah, I'm missing that one, but that's one too many.

When you’re drinking a bottle of water or something, that one missing button makes a perfect holder for the cap.

 

[Shrek27]

When you’re drinking a bottle of water or something, that one missing button makes a perfect holder for the cap.

The sticky winged foot on these phone mounts fits that space well.
Though I ended up not using it there I've seen others fit one nicely in that missing button spot.

https://www.amazon.com/Scosche-Magi...6ea-ad52-9312c2fedf45&pd_rd_i=B0CZ7KTVGZ&th=1

 

[jsoa]

If you got the Squatch then the only one missing is the disco.

SAS + Manual you are missing 2 (disconnect and trail turn assist)

I second the need for blank programmable switches to fill the gaps

 

[jsoa]

Trailer tow kit + diode dynamics hitch light + new shift boot installed (with red stitching)

 

[BAUS67]

SAS + Manual you are missing 2 (disconnect and trail turn assist)

I second the need for blank programmable switches to fill the gaps

I was going to draw attention to that when @Roger123 first posted that it had the TTA so not a manual. But just chose to roll with it.

 

[NatureMan]

Trailer tow kit + diode dynamics hitch light + new shift boot installed (with red stitching)

do you have any concerns with not having any heat tape on the trailer harness/plug by the exhaust since it is now exposed after the DD plug/harness? From factory, the plug is protected by the metal hitch.

I had the dual reverse light setup on my f150, and thinking about it for bronco. I also assume it will work with the perimeter lighting like f150 and not needing to wire it to an aux switch.

 

[jsoa]

do you have any concerns with not having any heat tape on the trailer harness/plug by the exhaust since it is now exposed after the DD plug/harness? From factory, the plug is protected by the metal hitch.

I had the dual reverse light setup on my f150, and thinking about it for bronco. I also assume it will work with the perimeter lighting like f150 and not needing to wire it to an aux switch.

I was thinking about that last night after a drive and checking the wires (while also nearly burning my self on the muffler). So a little concerned yea, I might try re-doing the wiring where the plug is behind the tow receiver. Or do what you say and taping it up

 

[RBF 1401]

FORD should have at least given the rest of us a full bank of switches using dummy switches... I'm jealous.

No need to be jealous. They are missing out on the Chick-fil-A ketchup cup holder...

 

[jsoa]

do you have any concerns with not having any heat tape on the trailer harness/plug by the exhaust since it is now exposed after the DD plug/harness? From factory, the plug is protected by the metal hitch.

I had the dual reverse light setup on my f150, and thinking about it for bronco. I also assume it will work with the perimeter lighting like f150 and not needing to wire it to an aux switch.

redid the wires, was able too fit the adapter behind the connector

it's a little tight fit but nothing seems pinched, and I ran the other wire to the light through the front of the hitch receiver

 

[Stevenson James]

Added vinyl to the rockers and the script logo to my OBX.

 

[KRAKEN]

Here you go...

Any more angles/pics of this one with the tire mounted?

Sponsored